On Wed, 17 Jul 2019 at 14:56, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
>
>
> On 7/17/19 1:11 PM, Krzysztof Kozlowski wrote:
> > On Wed, 17 Jul 2019 at 13:06, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 7/17/19 12:45 PM, Krzysztof Kozlowski wrote:
> >>> On Wed, 17 Jul 2019 at 12:39, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
> >>>>>>
> >>>>>> &bus_fsys {
> >>>>>> devfreq = <&bus_wcore>;
> >>>>>> + assigned-clocks = <&clock CLK_MOUT_ACLK200_FSYS>,
> >>>>>> + <&clock CLK_DOUT_ACLK200_FSYS>,
> >>>>>> + <&clock CLK_FOUT_DPLL>;
> >>>>>> + assigned-clock-parents = <&clock CLK_MOUT_SCLK_DPLL>;
> >>>>>> + assigned-clock-rates = <0>, <240000000>,<1200000000>;
> >>>>>
> >>>>> Here and in all other patches:
> >>>>> I am not entirely sure that this should be here. It looks like
> >>>>> property of the SoC. Do we expect that buses will be configured to
> >>>>> different clock rates between different boards?
> This is the board file for Exynos5420/5422/5800 which enables buses.
> Thus, I have change them here. Patch 49/50 adds these buses to
> Exynos5800 (Peach Pi). In Exynos5420 there is no clock tree for
> bus_isp266. The parents for different devices could be also different.
> It is because i.e. in 5420 there is 2 bit in the WCORE 1st mux while in
> 5422 there is 3 bits (6 parents possible).
> That's why I have picked exynos5422-odroid-core.dtsi to reference
> the bus devices and pinned them into proper parent and changed rate.
> When you check patch 49/50 for 5800 not all the parents are the same.
>
> (1) I could create a dedicated files like: exynos5422-bus.dtsi,
> exynos5420-bus.dtsi, exynos5800-bus.dtsi which would include some
> base file with the basic &bus_X and set the right parent, rate.
> Then these files would be included into proper board file like:
> exynos5800-peach-pi.dts.
> Is this something that you would like to see?
I see now. Are there any differences in all these properties between
Peach Pi and Odroids? Both of them are using exynos5800.dtsi so that
could be a place for all clock assignments.
Best regards,
Krzysztof
