Hi Dongchun,
On Thu, Jul 04, 2019 at 04:46:50PM +0800, dongchun.zhu@xxxxxxxxxxxx wrote:
> From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
>
> Add device tree binding documentation for the OV02A10 camera sensor.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/i2c/ov02a10.txt | 43 ++++++++++++++++++++++
> MAINTAINERS | 7 ++++
> 2 files changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> new file mode 100644
> index 0000000..d40aa87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> @@ -0,0 +1,43 @@
> +* Omnivision OV02A10 MIPI CSI-2 sensor
> +
> +Required Properties:
> +- compatible: shall be "ovti,ov02a10"
> +- clocks: reference to the xvclk input clock
> +- clock-names: shall be "xvclk"
> +- avdd-supply: Analog voltage supply, 2.8 volts
> +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> +- dvdd-supply: Digital core voltage supply, 1.8 volts
> +- reset-gpios: Low active reset gpio
> +
> +The device node shall contain one 'port' child node with an
> +'endpoint' subnode for its digital output video port,
> +in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +The endpoint optional property 'data-lanes' shall be "<1>".
How many lanes does the module (or the sensor) have?
> +
> +Example:
> +&i2c4 {
> + ov02a10: camera-sensor@3d {
> + compatible = "ovti,ov02a10";
> + reg = <0x3d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> +
> + clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> + <&topckgen CLK_TOP_UNIVP_192M_D8>;
> + clock-names = "xvclk", "freq_mux";
> +
> + avdd-supply = <&mt6358_vcama1_reg>;
> + dvdd-supply = <&mt6358_vcn18_reg>;
> + dovdd-supply = <&mt6358_vcamio_reg>;
> + pwdn-gpios = <&pio 107 1>;
> + reset-gpios = <&pio 109 1>;
> +
> + port {
> + ov02a10_core: endpoint {
> + remote-endpoint = <&ov02a10_0>;
Indentation is still wrong. :-(
> + data-lanes = <1>;
> + };
> + };
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5cfbea4..62b81ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11571,6 +11571,13 @@ T: git git://linuxtv.org/media_tree.git
> S: Maintained
> F: drivers/media/i2c/ov13858.c
>
> +OMNIVISION OV02A10 SENSOR DRIVER
> +M: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> +L: linux-media@xxxxxxxxxxxxxxx
> +T: git git://linuxtv.org/media_tree.git
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> +
> OMNIVISION OV2680 SENSOR DRIVER
> M: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
> L: linux-media@xxxxxxxxxxxxxxx
--
Kind regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
