On Mon, Jul 15, 2019 at 6:36 PM Andrew Jeffery <andrew@xxxxxxxx> wrote: > > > > On Tue, 16 Jul 2019, at 07:47, Rob Herring wrote: > > On Thu, Jul 11, 2019 at 9:32 PM Andrew Jeffery <andrew@xxxxxxxx> wrote: > > > > > > The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the > > > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit > > > data bus if only a single slot is enabled. > > > > > > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> > > > --- > > > In v2: > > > > > > * Rename to aspeed,sdhci.yaml > > > * Rename sd-controller compatible > > > * Add `maxItems: 1` for reg properties > > > * Move sdhci subnode description to patternProperties > > > * Drop sdhci compatible requirement > > > * #address-cells and #size-cells are required > > > * Prevent additional properties > > > * Implement explicit ranges in example > > > * Remove slot property > > > > > > .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++ > > > 1 file changed, 90 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml > > > new file mode 100644 > > > index 000000000000..67a691c3348c > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml > > > @@ -0,0 +1,90 @@ > > > +# SPDX-License-Identifier: GPL-2.0-or-later > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: ASPEED SD/SDIO/eMMC Controller > > > + > > > +maintainers: > > > + - Andrew Jeffery <andrew@xxxxxxxx> > > > + - Ryan Chen <ryanchen.aspeed@xxxxxxxxx> > > > + > > > +description: |+ > > > + The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO > > > + Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if > > > + only a single slot is enabled. > > > + > > > + The two slots are supported by a common configuration area. As the SDHCIs for > > > + the slots are dependent on the common configuration area, they are described > > > + as child nodes. > > > + > > > +properties: > > > + compatible: > > > + enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ] > > > > This is actually a list of 4 strings. Please reformat to 1 per line. > > On reflection that's obvious, but also a somewhat subtle interaction with the > preference for no quotes (the obvious caveat being "except where required"). It wasn't something I'd run into before. I'm working on a check, but unfortunately we can only check for quotes not needed and can't check for missing quotes. > Thanks for pointing it out. > > I have been running `make dt_binding_check` and `make dtbs_check` over > these, looks like I need to up my game a bit though. Do you do additional things > in your workflow? That should have thrown the warnings. If you aren't seeing those, do you have dtschema package installed (see Documentation/devicetree/writing-schema.md)? Or it could be erroring out on something else first. There's a few breakages that I'm trying to fix. Rob
