The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if only a single slot is enabled. Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> --- In v2: * Rename to aspeed,sdhci.yaml * Rename sd-controller compatible * Add `maxItems: 1` for reg properties * Move sdhci subnode description to patternProperties * Drop sdhci compatible requirement * #address-cells and #size-cells are required * Prevent additional properties * Implement explicit ranges in example * Remove slot property .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml new file mode 100644 index 000000000000..67a691c3348c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED SD/SDIO/eMMC Controller + +maintainers: + - Andrew Jeffery <andrew@xxxxxxxx> + - Ryan Chen <ryanchen.aspeed@xxxxxxxxx> + +description: |+ + The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO + Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if + only a single slot is enabled. + + The two slots are supported by a common configuration area. As the SDHCIs for + the slots are dependent on the common configuration area, they are described + as child nodes. + +properties: + compatible: + enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ] + reg: + maxItems: 1 + description: Common configuration registers + ranges: true + clocks: + maxItems: 1 + description: The SD/SDIO controller clock gate + +patternProperties: + "^sdhci@[0-9a-f]+$": + type: object + properties: + compatible: + enum: [ aspeed,ast2400-sdhci, aspeed,ast2500-sdhci ] + reg: + maxItems: 1 + description: The SDHCI registers + clocks: + maxItems: 1 + description: The SD bus clock + interrupts: + maxItems: 1 + description: The SD interrupt shared between both slots + required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + sdc@1e740000 { + compatible = "aspeed,ast2500-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + + sdhci0: sdhci@100 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x100 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + }; + + sdhci1: sdhci@200 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x200 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + }; + }; -- 2.20.1
