veyron jaq, jerry, minnie and speedy have mostly redundant regulator
and pinctrl configurations for the panel/backlight. Consolidate these
pieces in the eDP .dtsi.
Also change the default power supply for the panel to
'panel_regulator', instead of overriding it in all the board files.
pinky is the only device that uses 'vcc33_lcd' (the prior default),
so overwrite it in this case. pinky doesn't have a complete display
configuration, to keep things as they were delete the common nodes
that didn't exist previously in pinky's board file.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v2:
- rebased on v5.4-armsoc/dts32 (0d19541e3b45)
---
arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 51 ++++++++++++++++++-
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 55 --------------------
arch/arm/boot/dts/rk3288-veyron-jerry.dts | 58 ----------------------
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 51 -------------------
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 17 +++++++
arch/arm/boot/dts/rk3288-veyron-speedy.dts | 58 ----------------------
6 files changed, 67 insertions(+), 223 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
index 5d812e9e78aa..39f56d36a701 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -6,6 +6,40 @@
*/
/ {
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
@@ -48,12 +82,13 @@
pwms = <&pwm0 0 1000000 0>;
post-pwm-on-delay-ms = <10>;
pwm-off-delay-ms = <10>;
+ power-supply = <&backlight_regulator>;
};
panel: panel {
compatible ="innolux,n116bge", "simple-panel";
status = "okay";
- power-supply = <&vcc33_lcd>;
+ power-supply = <&panel_regulator>;
backlight = <&backlight>;
panel-timing {
@@ -105,10 +140,24 @@
&pinctrl {
backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
bl_en: bl-en {
rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pwm0 {
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index fcd119168cb6..80386203e85b 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -16,40 +16,6 @@
"google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
"google,veyron-jaq-rev1", "google,veyron-jaq",
"google,veyron", "rockchip,rk3288";
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
};
&backlight {
@@ -87,11 +53,6 @@
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
- power-supply = <&backlight_regulator>;
-};
-
-&panel {
- power-supply = <&panel_regulator>;
};
&rk808 {
@@ -343,12 +304,6 @@
};
&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -361,16 +316,6 @@
};
};
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index 164561f04c1d..a8f55aec09ee 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -18,48 +18,6 @@
"google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-};
-
-&backlight {
- power-supply = <&backlight_regulator>;
-};
-
-&panel {
- power-supply= <&panel_regulator>;
};
&rk808 {
@@ -311,12 +269,6 @@
};
&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -329,16 +281,6 @@
};
};
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 4cc7d3659484..2b0801a539c9 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -15,40 +15,6 @@
"google,veyron-minnie-rev0", "google,veyron-minnie",
"google,veyron", "rockchip,rk3288";
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
volume_buttons: volume-buttons {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -137,7 +103,6 @@
&panel {
compatible = "auo,b101ean01", "simple-panel";
- power-supply= <&panel_regulator>;
/delete-node/ panel-timing;
@@ -411,12 +376,6 @@
};
&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -439,16 +398,6 @@
};
};
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 9b6f4d9b03b6..06af58e37a4b 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -14,7 +14,14 @@
compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
"google,veyron", "rockchip,rk3288";
+ /delete-node/backlight-regulator;
+ /delete-node/panel-regulator;
/delete-node/emmc-pwrseq;
+ /delete-node/vcc18-lcd;
+};
+
+&backlight {
+ /delete-property/power-supply;
};
&emmc {
@@ -52,7 +59,17 @@
i2c-scl-rising-time-ns = <300>;
};
+&panel {
+ power-supply= <&vcc33_lcd>;
+};
+
&pinctrl {
+ /delete-node/ lcd;
+
+ backlight {
+ /delete-node/ bl_pwr_en;
+ };
+
buttons {
pwr_key_h: pwr-key-h {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 9b140db04456..2f2989bc3f9c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -16,44 +16,6 @@
"google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
"google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
"google,veyron-speedy", "google,veyron", "rockchip,rk3288";
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-};
-
-&backlight {
- power-supply = <&backlight_regulator>;
};
&cpu_alert0 {
@@ -83,10 +45,6 @@
temperature = <90000>;
};
-&panel {
- power-supply= <&panel_regulator>;
-};
-
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
@@ -321,12 +279,6 @@
};
&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -339,16 +291,6 @@
};
};
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
--
2.22.0.410.gd8fdbe21b5-goog
