The patch adds binding for ftm alarm driver
Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
---
Change in v3:
- remove reg-names property
- correct cells number
Change in v2:
- replace ls1043a with ls1088a as example
- add rcpm node and fsl,rcpm-wakeup property
.../devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
new file mode 100644
index 0000000..e4eea18
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
@@ -0,0 +1,38 @@
+Freescale FlexTimer Module (FTM) Alarm
+
+Note: The driver need work with RCPM driver to wake up system in sleep.
+
+Required properties:
+- compatible : Should be "fsl,<chip>-ftm-alarm", the
+ supported chips include
+ "fsl,ls1012a-ftm-alarm"
+ "fsl,ls1021a-ftm-alarm"
+ "fsl,ls1028a-ftm-alarm"
+ "fsl,ls1043a-ftm-alarm"
+ "fsl,ls1046a-ftm-alarm"
+ "fsl,ls1088a-ftm-alarm"
+ "fsl,ls208xa-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+ FlexTimer Module and base physical address of IP Powerdown Exception Control
+ Register.
+- interrupts : Should be the FlexTimer Module interrupt.
+- fsl,rcpm-wakeup property and rcpm node : Please refer
+ Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+
+Optional properties:
+- big-endian: If the host controller is big-endian mode, specify this property.
+ The default endian mode is little-endian.
+
+Example:
+rcpm: rcpm@1e34040 {
+ compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x18>;
+ fsl,#rcpm-wakeup-cells = <6>;
+}
+
+ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ls1088a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+ interrupts = <0 44 4>;
+}
--
2.7.4
