This series adds support for Amazon's Annapurna Labs DT-based PCIe host
controller driver.
Additionally, it adds 3 quirks (ACS, VPD and MSI-X) and 2 generic DWC patches.
Regarding the 2nd DWC patch (PCI flags support), do you think this should
be done in the context of a host-bridge driver at all (as opposed to PCI
system-wide code)?
Ali Saidi (1):
PCI: Add ACS quirk for Amazon Annapurna Labs root ports
Jonathan Chocron (7):
PCI: Add Amazon's Annapurna Labs vendor ID
PCI/VPD: Add VPD release quirk for Amazon Annapurna Labs host bridge
PCI: Add quirk to disable MSI support for Amazon's Annapurna Labs host
bridge
dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
PCI: al: Add support for DW based driver type
PCI: dw: Add validation that PCIe core is set to correct mode
PCI: dw: Add support for PCI_PROBE_ONLY/PCI_REASSIGN_ALL_BUS flags
.../devicetree/bindings/pci/pcie-al.txt | 45 ++
MAINTAINERS | 1 +
drivers/pci/controller/dwc/Kconfig | 11 +
drivers/pci/controller/dwc/pcie-al.c | 397 ++++++++++++++++++
.../pci/controller/dwc/pcie-designware-ep.c | 8 +
.../pci/controller/dwc/pcie-designware-host.c | 31 +-
drivers/pci/quirks.c | 27 ++
drivers/pci/vpd.c | 12 +
include/linux/pci_ids.h | 2 +
9 files changed, 530 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/pcie-al.txt
--
2.17.1
