From: Anson Huang <Anson.Huang@xxxxxxx> Update opp-suspend property's description to support multiple opp-suspend properties defined in DT, the OPP with highest opp-hz and with opp-suspend property present will be used as suspend opp. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> --- New patch. --- Documentation/devicetree/bindings/opp/opp.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 76b6c79..6859227 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -140,8 +140,8 @@ Optional properties: frequency for a short duration of time limited by the device's power, current and thermal limits. -- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in - the table should have this. +- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs + in the table have this, the OPP with highest opp-hz will be used. - opp-supported-hw: This enables us to select only a subset of OPPs from the larger OPP table, based on what version of the hardware we are running on. We -- 2.7.4
