On Wed, Jul 3, 2019 at 3:03 PM Abel Vesa <abel.vesa@xxxxxxx> wrote:
>
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather then using clock
> consumer API in a clock provider driver.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
For audio related clock:
Acked-by: Daniel Baluta <daniel.baluta@xxxxxxx>
> ---
>
> Changes since v1:
> - removed the PCIE and CSI clocks parent setting since
> that should be done from their driver, as suggested
> by Leonard.
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808..c286f20 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -489,6 +489,20 @@
> clock-names = "ckil", "osc_25m", "osc_27m",
> "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> + <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> + <&clk IMX8MQ_CLK_NOC>;
> + assigned-clock-parents = <0>,
> + <&clk IMX8MQ_SYS1_PLL_133M>,
> + <&clk IMX8MQ_SYS1_PLL_266M>,
> + <&clk IMX8MQ_SYS2_PLL_500M>,
> + <&clk IMX8MQ_CLK_27M>,
> + <&clk IMX8MQ_SYS1_PLL_800M>;
> + assigned-clock-rates = <593999999>;
> +
> };
>
> src: reset-controller@30390000 {
> --
> 2.7.4
>
