The patch dt-bindings: regulator: add support for the stm32-booster has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From d6d02bc6e80453ca004e101eae28d741bde54426 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier <fabrice.gasnier@xxxxxx> Date: Mon, 1 Jul 2019 10:14:22 +0200 Subject: [PATCH] dt-bindings: regulator: add support for the stm32-booster Document the 3.3V booster regulator embedded in stm32h7 and stm32mp1 devices, that can be used to supply ADC analog input switches. It's controlled by using system configuration registers (SYSCFG). Introduce two compatibles as the booster regulator is controlled by: - a unique register/bit in STM32H7 - a set/clear register pair in STM32MP1 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../bindings/regulator/st,stm32-booster.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32-booster.txt diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt new file mode 100644 index 000000000000..479ad4c8758e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt @@ -0,0 +1,18 @@ +STM32 BOOSTER - Booster for ADC analog input switches + +Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used +to supply ADC analog input switches. + +Required properties: +- compatible: Should be one of: + "st,stm32h7-booster" + "st,stm32mp1-booster" +- st,syscfg: Phandle to system configuration controller. +- vdda-supply: Phandle to the vdda input analog voltage. + +Example: + booster: regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + vdda-supply = <&vdda>; + }; -- 2.20.1
