The patch regulator: add support for the stm32-booster has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 4e210fbeee8e2f0eb04761c624fcccc8401eba4c Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier <fabrice.gasnier@xxxxxx> Date: Mon, 1 Jul 2019 10:14:23 +0200 Subject: [PATCH] regulator: add support for the stm32-booster Add support for the 3.3V booster regulator embedded in stm32h7 and stm32mp1 devices, that can be used to supply ADC analog input switches. This regulator is supplied by vdda. It's controlled by using SYSCFG: - STM32H7 has a unique register to set/clear the booster enable bit - STM32MP1 has separate set and clear registers to configure it. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/Kconfig | 11 +++ drivers/regulator/Makefile | 1 + drivers/regulator/stm32-booster.c | 132 ++++++++++++++++++++++++++++++ 3 files changed, 144 insertions(+) create mode 100644 drivers/regulator/stm32-booster.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 0e7d425ba9b1..1e590ecf1a9d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -839,6 +839,17 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. +config REGULATOR_STM32_BOOSTER + tristate "STMicroelectronics STM32 BOOSTER" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports internal booster (3V3) embedded in some + STMicroelectronics STM32 chips. It can be used to supply ADC analog + input switches when vdda supply is below 2.7V. + + This driver can also be built as a module. If so, the module + will be called stm32-booster. + config REGULATOR_STM32_VREFBUF tristate "STMicroelectronics STM32 VREFBUF" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index c15b0b613766..eef73b5a35a4 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o +obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o diff --git a/drivers/regulator/stm32-booster.c b/drivers/regulator/stm32-booster.c new file mode 100644 index 000000000000..2a897666c650 --- /dev/null +++ b/drivers/regulator/stm32-booster.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2019 +// Author(s): Fabrice Gasnier <fabrice.gasnier@xxxxxx>. + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* STM32H7 SYSCFG register */ +#define STM32H7_SYSCFG_PMCR 0x04 +#define STM32H7_SYSCFG_BOOSTE_MASK BIT(8) + +/* STM32MP1 SYSCFG has set and clear registers */ +#define STM32MP1_SYSCFG_PMCSETR 0x04 +#define STM32MP1_SYSCFG_PMCCLRR 0x44 +#define STM32MP1_SYSCFG_EN_BOOSTER_MASK BIT(8) + +static const struct regulator_ops stm32h7_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32h7_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, /* up to 50us to stabilize */ + .ops = &stm32h7_booster_ops, + .enable_reg = STM32H7_SYSCFG_PMCR, + .enable_mask = STM32H7_SYSCFG_BOOSTE_MASK, + .owner = THIS_MODULE, +}; + +static int stm32mp1_booster_enable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCSETR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static int stm32mp1_booster_disable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCCLRR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static const struct regulator_ops stm32mp1_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = stm32mp1_booster_enable, + .disable = stm32mp1_booster_disable, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32mp1_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, + .ops = &stm32mp1_booster_ops, + .enable_reg = STM32MP1_SYSCFG_PMCSETR, + .enable_mask = STM32MP1_SYSCFG_EN_BOOSTER_MASK, + .owner = THIS_MODULE, +}; + +static int stm32_booster_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct regulator_config config = { }; + const struct regulator_desc *desc; + struct regulator_dev *rdev; + struct regmap *regmap; + int ret; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + desc = (const struct regulator_desc *) + of_match_device(dev->driver->of_match_table, dev)->data; + + config.regmap = regmap; + config.dev = dev; + config.of_node = np; + config.init_data = of_get_regulator_init_data(dev, np, desc); + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "register failed with error %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id stm32_booster_of_match[] = { + { + .compatible = "st,stm32h7-booster", + .data = (void *)&stm32h7_booster_desc + }, { + .compatible = "st,stm32mp1-booster", + .data = (void *)&stm32mp1_booster_desc + }, { + }, +}; +MODULE_DEVICE_TABLE(of, stm32_booster_of_match); + +static struct platform_driver stm32_booster_driver = { + .probe = stm32_booster_probe, + .driver = { + .name = "stm32-booster", + .of_match_table = of_match_ptr(stm32_booster_of_match), + }, +}; +module_platform_driver(stm32_booster_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@xxxxxx>"); +MODULE_DESCRIPTION("STMicroelectronics STM32 booster regulator driver"); +MODULE_ALIAS("platform:stm32-booster"); -- 2.20.1
