Re: [PATCH 4/4] devicetree: Add led-backlight binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Daniel,

On 02/07/2019 11:58, Daniel Thompson wrote:
On Mon, Jul 01, 2019 at 05:14:23PM +0200, Jean-Jacques Hiblot wrote:
From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>

Add DT binding for led-backlight.
I think the patchset is in the wrong order; the DT bindings
documentation should appear *before* the binding is
implemented (amoung other things this prevent transient checkpatch
warnings as the patchset is applied).

ok
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
  .../video/backlight/led-backlight.txt         | 39 +++++++++++++++++++
  1 file changed, 39 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
new file mode 100644
index 000000000000..216cd52d624a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
@@ -0,0 +1,39 @@
+led-backlight bindings
+
+The node of the backlight driver IS the node of the LED.
+
+Required properties:
+  - compatible: "led-backlight"
+  - brightness-levels: Array of distinct LED brightness levels. These
+      are in the range from 0 to 255, passed to the LED class driver.
+  - default-brightness-level: the default brightness level (index into the
+      array defined by the "brightness-levels" property)
I think brightness-levels and default-brightness-level could be
optional properties since a default 1:1 mapping seems reasonable given
how constrained the LED brightness values are.

That is probably a good idea. Expect it in v2

Thanks,

JJ



Daniel.


+
+Optional properties:
+  - power-supply: regulator for supply voltage
+  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+                  and disables the backlight (see GPIO binding[0])
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+led_ctrl {
+	red_led@1 {
+	        label = "red";
+		reg = <1>;
+	}
+
+	backlight_led@2 {
+		function = LED_FUNCTION_BACKLIGHT;
+		reg = <2>;
+
+		compatible = "led-backlight";
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&vdd_bl_reg>;
+		enable-gpios = <&gpio 58 0>;
+	};
+};
--
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux