On Mon, Jul 01, 2019 at 05:14:23PM +0200, Jean-Jacques Hiblot wrote:
> From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>
> Add DT binding for led-backlight.
I think the patchset is in the wrong order; the DT bindings
documentation should appear *before* the binding is
implemented (amoung other things this prevent transient checkpatch
warnings as the patchset is applied).
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> .../video/backlight/led-backlight.txt | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..216cd52d624a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
> @@ -0,0 +1,39 @@
> +led-backlight bindings
> +
> +The node of the backlight driver IS the node of the LED.
> +
> +Required properties:
> + - compatible: "led-backlight"
> + - brightness-levels: Array of distinct LED brightness levels. These
> + are in the range from 0 to 255, passed to the LED class driver.
> + - default-brightness-level: the default brightness level (index into the
> + array defined by the "brightness-levels" property)
I think brightness-levels and default-brightness-level could be
optional properties since a default 1:1 mapping seems reasonable given
how constrained the LED brightness values are.
Daniel.
> +
> +Optional properties:
> + - power-supply: regulator for supply voltage
> + - enable-gpios: contains a single GPIO specifier for the GPIO which enables
> + and disables the backlight (see GPIO binding[0])
> +
> +[0]: Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Example:
> +
> +led_ctrl {
> + red_led@1 {
> + label = "red";
> + reg = <1>;
> + }
> +
> + backlight_led@2 {
> + function = LED_FUNCTION_BACKLIGHT;
> + reg = <2>;
> +
> + compatible = "led-backlight";
> +
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> +
> + power-supply = <&vdd_bl_reg>;
> + enable-gpios = <&gpio 58 0>;
> + };
> +};
> --
> 2.17.1
>
