From: Anson Huang <Anson.Huang@xxxxxxx>
On some i.MX8M platforms, clock driver uses platform driver
model and it is NOT ready during timer initialization phase,
the clock operations will fail and system counter driver will
fail too. As all the i.MX8M platforms' system counter clock
are from OSC which is always enabled, so it is no need to enable
clock for system counter driver, the ONLY thing is to pass
clock frequence to driver.
To make system counter driver work for upper scenario, if DT's
system counter node has property "clock-frequency" present,
setting TIMER_OF_CLOCK_FREQUENCY flag to indicate timer-of driver
to get clock frequency from DT directly instead of of_clk operation
via clk APIs.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V3:
- remove the .prop_name initialization acording to timer-of changes in V4.
---
drivers/clocksource/timer-imx-sysctr.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
index fd7d680..b82a549 100644
--- a/drivers/clocksource/timer-imx-sysctr.c
+++ b/drivers/clocksource/timer-imx-sysctr.c
@@ -98,7 +98,7 @@ static irqreturn_t sysctr_timer_interrupt(int irq, void *dev_id)
}
static struct timer_of to_sysctr = {
- .flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE,
.clkevt = {
.name = "i.MX system counter timer",
.features = CLOCK_EVT_FEAT_ONESHOT |
@@ -130,6 +130,9 @@ static int __init sysctr_timer_init(struct device_node *np)
{
int ret = 0;
+ to_sysctr.flags |= of_find_property(np, "clock-frequency", NULL) ?
+ TIMER_OF_CLOCK_FREQUENCY : TIMER_OF_CLOCK;
+
ret = timer_of_init(np, &to_sysctr);
if (ret)
return ret;
--
2.7.4
