By default Spread-Spectrum Clocking (SSC) is disabled on the RTL8211E. Enable it if the device tree property 'realtek,enable-ssc' exists. Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> --- drivers/net/phy/realtek.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index dfc2e20ef335..b617169ccc8c 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -9,8 +9,10 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc. */ #include <linux/bitops.h> -#include <linux/phy.h> +#include <linux/device.h> +#include <linux/of.h> #include <linux/module.h> +#include <linux/phy.h> #define RTL821x_PHYSR 0x11 #define RTL821x_PHYSR_DUPLEX BIT(13) @@ -28,6 +30,8 @@ #define RTL8211E_EXT_PAGE 7 #define RTL8211E_EPAGSR 0x1e +#define RTL8211E_SCR 0x1a +#define RTL8211E_SCR_DISABLE_RXC_SSC BIT(2) #define RTL8211F_INSR 0x1d @@ -87,8 +91,8 @@ static int rtl821e_restore_page(struct phy_device *phydev, int oldpage, int ret) return ret; } -static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev, - int page, u32 regnum, u16 mask, u16 set) +static int rtl8211e_modify_ext_paged(struct phy_device *phydev, int page, + u32 regnum, u16 mask, u16 set) { int ret = 0; int oldpage; @@ -114,6 +118,22 @@ static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev, return rtl821e_restore_page(phydev, oldpage, ret); } +static int rtl8211e_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + int err; + + if (of_property_read_bool(dev->of_node, "realtek,enable-ssc")) { + err = rtl8211e_modify_ext_paged(phydev, 0xa0, RTL8211E_SCR, + RTL8211E_SCR_DISABLE_RXC_SSC, + 0); + if (err) + dev_err(dev, "failed to enable SSC on RXC: %d\n", err); + } + + return 0; +} + static int rtl8201_ack_interrupt(struct phy_device *phydev) { int err; @@ -372,6 +392,7 @@ static struct phy_driver realtek_drvs[] = { .config_init = &rtl8211e_config_init, .ack_interrupt = &rtl821x_ack_interrupt, .config_intr = &rtl8211e_config_intr, + .probe = rtl8211e_probe, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = rtl821x_read_page, -- 2.22.0.410.gd8fdbe21b5-goog