28.06.2019 5:12, Sowjanya Komatineni пишет:
> This patch adds support for Tegra pinctrl driver suspend and resume.
>
> During suspend, context of all pinctrl registers are stored and
> on resume they are all restored to have all the pinmux and pad
> configuration for normal operation.
>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
> drivers/pinctrl/tegra/pinctrl-tegra.c | 52 ++++++++++++++++++++++++++++++++
> drivers/pinctrl/tegra/pinctrl-tegra.h | 3 ++
> drivers/pinctrl/tegra/pinctrl-tegra210.c | 1 +
> 3 files changed, 56 insertions(+)
>
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
> index 34596b246578..e7c0a1011cba 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> @@ -621,6 +621,43 @@ static void tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx)
> }
> }
>
> +static int tegra_pinctrl_suspend(struct device *dev)
> +{
> + struct tegra_pmx *pmx = dev_get_drvdata(dev);
> + u32 *backup_regs = pmx->backup_regs;
> + u32 *regs;
> + unsigned int i, j;
> +
> + for (i = 0; i < pmx->nbanks; i++) {
> + regs = pmx->regs[i];
> + for (j = 0; j < pmx->reg_bank_size[i] / 4; j++)
> + *backup_regs++ = readl(regs++);
> + }
> +
> + return pinctrl_force_sleep(pmx->pctl);
> +}
> +
> +static int tegra_pinctrl_resume(struct device *dev)
> +{
> + struct tegra_pmx *pmx = dev_get_drvdata(dev);
> + u32 *backup_regs = pmx->backup_regs;
> + u32 *regs;
> + unsigned int i, j;
> +
> + for (i = 0; i < pmx->nbanks; i++) {
> + regs = pmx->regs[i];
> + for (j = 0; j < pmx->reg_bank_size[i] / 4; j++)
> + writel(*backup_regs++, regs++);
> + }
> +
> + return 0;
> +}
> +
> +const struct dev_pm_ops tegra_pinctrl_pm = {
> + .suspend = &tegra_pinctrl_suspend,
> + .resume = &tegra_pinctrl_resume
> +};
Hm, so this are the generic platform-driver suspend-resume OPS here, which is very
nice! But.. shouldn't pinctrl be resumed before the CLK driver (which is syscore_ops
in this version of the series)? .. Given that "clock" function may need to be
selected for some of the pins.
