Re: [RESEND PATCH 00/10] crypto: k3: Add sa2ul driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 28/06/19 10:55 AM, Eric Biggers wrote:
On Fri, Jun 28, 2019 at 10:44:26AM +0530, keerthy wrote:


On 6/28/2019 10:23 AM, Eric Biggers wrote:
Hi Keerthy,

On Fri, Jun 28, 2019 at 09:57:35AM +0530, Keerthy wrote:
The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.

The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
    requiring DRM (digital rights management) and
    content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2UL needs on tx channel and a pair of rx dma channels.

This series has dependency on UDMA series. Hence is based on top of:

https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105

The above series adds couple of dmaengine APIs that are used
by the sa2ul driver. Hence there is a hard dependency on the
above series.

Resending with linux-crypto list in Cc.

Keerthy (10):
    dt-bindings: crypto: k3: Add sa2ul bindings documentation
    crypto: sa2ul: Add crypto driver
    crypto: sa2ul: Add AES ECB Mode support
    crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm
    crypto: sha256_generic: Export the Transform function
    crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support
    crypto: sa2ul: Add hmac(sha1) HMAC algorithm support
    crypto: sa2ul: Add hmac(sha256) HMAC algorithm support
    sa2ul: Add 3DES ECB & CBC Mode support
    arm64: dts: k3-am6: Add crypto accelarator node

   .../devicetree/bindings/crypto/sa2ul.txt      |   47 +
   arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   33 +
   crypto/sha256_generic.c                       |    3 +-
   drivers/crypto/Kconfig                        |   17 +
   drivers/crypto/Makefile                       |    1 +
   drivers/crypto/sa2ul.c                        | 2232 +++++++++++++++++
   drivers/crypto/sa2ul.h                        |  384 +++
   include/crypto/sha.h                          |    1 +
   8 files changed, 2717 insertions(+), 1 deletion(-)
   create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt
   create mode 100644 drivers/crypto/sa2ul.c
   create mode 100644 drivers/crypto/sa2ul.h

Did you run the crypto self-tests on this driver?  i.e. boot a kernel with

	# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
	CONFIG_DEBUG_KERNEL=y
	CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y

What are the results?

Eric,

Thanks for your response. I did try with that. All test cases
were passing on 4.19 kernel before the testmgr revamp.


That's surprising, since your driver doesn't implement update() for hashing, so
it should have been failing at least the HMAC tests.  Are you sure you really
ran the tests?

Yes partial update was the failing case.


Currently few of the test cases do fail. For ex: Appending
the last ivlen bytes of cipher text as the IV.

Well, these need to be fixed.

Okay. So passing all the crypto manager test cases seems to be the prerequisite. I will work on them.





Also, this patchset does not compile for me.

This has dependency on UDMA series:
https://patchwork.kernel.org/cover/10930969/

I had that applied.

Okay. I will check if there were additional patches that were needed.

Thanks,
Keerthy


- Eric




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux