Re: [RESEND PATCH 00/10] crypto: k3: Add sa2ul driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 28, 2019 at 10:44:26AM +0530, keerthy wrote:
> 
> 
> On 6/28/2019 10:23 AM, Eric Biggers wrote:
> > Hi Keerthy,
> > 
> > On Fri, Jun 28, 2019 at 09:57:35AM +0530, Keerthy wrote:
> > > The series adds Crypto hardware accelerator support for SA2UL.
> > > SA2UL stands for security accelerator ultra lite.
> > > 
> > > The Security Accelerator (SA2_UL) subsystem provides hardware
> > > cryptographic acceleration for the following use cases:
> > > • Encryption and authentication for secure boot
> > > • Encryption and authentication of content in applications
> > >    requiring DRM (digital rights management) and
> > >    content/asset protection
> > > The device includes one instantiation of SA2_UL named SA2_UL0
> > > 
> > > SA2UL needs on tx channel and a pair of rx dma channels.
> > > 
> > > This series has dependency on UDMA series. Hence is based on top of:
> > > 
> > > https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105
> > > 
> > > The above series adds couple of dmaengine APIs that are used
> > > by the sa2ul driver. Hence there is a hard dependency on the
> > > above series.
> > > 
> > > Resending with linux-crypto list in Cc.
> > > 
> > > Keerthy (10):
> > >    dt-bindings: crypto: k3: Add sa2ul bindings documentation
> > >    crypto: sa2ul: Add crypto driver
> > >    crypto: sa2ul: Add AES ECB Mode support
> > >    crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm
> > >    crypto: sha256_generic: Export the Transform function
> > >    crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support
> > >    crypto: sa2ul: Add hmac(sha1) HMAC algorithm support
> > >    crypto: sa2ul: Add hmac(sha256) HMAC algorithm support
> > >    sa2ul: Add 3DES ECB & CBC Mode support
> > >    arm64: dts: k3-am6: Add crypto accelarator node
> > > 
> > >   .../devicetree/bindings/crypto/sa2ul.txt      |   47 +
> > >   arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   33 +
> > >   crypto/sha256_generic.c                       |    3 +-
> > >   drivers/crypto/Kconfig                        |   17 +
> > >   drivers/crypto/Makefile                       |    1 +
> > >   drivers/crypto/sa2ul.c                        | 2232 +++++++++++++++++
> > >   drivers/crypto/sa2ul.h                        |  384 +++
> > >   include/crypto/sha.h                          |    1 +
> > >   8 files changed, 2717 insertions(+), 1 deletion(-)
> > >   create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt
> > >   create mode 100644 drivers/crypto/sa2ul.c
> > >   create mode 100644 drivers/crypto/sa2ul.h
> > 
> > Did you run the crypto self-tests on this driver?  i.e. boot a kernel with
> > 
> > 	# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
> > 	CONFIG_DEBUG_KERNEL=y
> > 	CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
> > 
> > What are the results?
> 
> Eric,
> 
> Thanks for your response. I did try with that. All test cases
> were passing on 4.19 kernel before the testmgr revamp.
> 

That's surprising, since your driver doesn't implement update() for hashing, so
it should have been failing at least the HMAC tests.  Are you sure you really
ran the tests?

> Currently few of the test cases do fail. For ex: Appending
> the last ivlen bytes of cipher text as the IV.

Well, these need to be fixed.

> 
> > 
> > Also, this patchset does not compile for me.
> 
> This has dependency on UDMA series:
> https://patchwork.kernel.org/cover/10930969/

I had that applied.

- Eric



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux