On Fri, Jun 07, 2019 at 01:11:10PM +0200, H. Nikolaus Schaller wrote: > Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > --- > .../display/panel/ortustech,com37h3m99dtc.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt > new file mode 100644 > index 000000000000..06a73c3f46b5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt > @@ -0,0 +1,12 @@ > +OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel > + > +Required properties: > +- compatible: should be "ortustech,com37h3m99dtc" > + > +Optional properties: > +- enable-gpios: GPIO pin to enable or disable the panel > +- backlight: phandle of the backlight device attached to the panel > +- power-supply: phandle of the regulator that provides the supply voltage > + > +This binding is compatible with the simple-panel binding, which is specified > +in simple-panel.txt in this directory. > -- > 2.19.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel
