As per the convention for any SOC device with external connection, define only device DT node in SOC DTSi file with status = "disabled" and enable device in Board DTS file with status = "okay" Reported-by: Anup Patel <anup@xxxxxxxxxxxxxx> Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx> --- arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 6 ++++++ arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 13 +++++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index 4e8fbde..cc73522 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -177,6 +177,7 @@ interrupt-parent = <&plic0>; interrupts = <4>; clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; }; uart1: serial@10011000 { compatible = "sifive,fu540-c000-uart", "sifive,uart0"; @@ -184,6 +185,7 @@ interrupt-parent = <&plic0>; interrupts = <5>; clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; }; i2c0: i2c@10030000 { compatible = "sifive,fu540-c000-i2c", "sifive,i2c0"; @@ -195,6 +197,7 @@ reg-io-width = <1>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi0: spi@10040000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -205,6 +208,7 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi1: spi@10041000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -215,6 +219,7 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi2: spi@10050000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -224,6 +229,7 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; }; diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index 4da8870..0b55c53 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -42,7 +42,20 @@ }; }; +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + &qspi0 { + status = "okay"; flash@0 { compatible = "issi,is25wp256", "jedec,spi-nor"; reg = <0>; -- 1.9.1