[PATCH] riscv: dts: Re-organize SPI DT nodes

[Yash Shah <yash.shah@xxxxxxxxxx>]

As per the General convention, define only device DT node in SOC DTSi
file with status = "disabled" and enable device in Board DTS file with
status = "okay"

Reported-by: Anup Patel <anup@xxxxxxxxxxxxxx>
Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi          | 3 +++
 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 4e8fbde..270f6e8 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -203,6 +203,7 @@
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -213,6 +214,7 @@
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -222,6 +224,7 @@
 			interrupt-parent = <&plic0>;
 			interrupts = <6>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 4da8870..73e2af6 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -43,6 +43,7 @@
 };
 
 &qspi0 {
+	status = "okay";
 	flash@0 {
 		compatible = "issi,is25wp256", "jedec,spi-nor";
 		reg = <0>;
-- 
1.9.1