> On Jun 21, 2019, at 4:59 PM, Atish Patra <Atish.Patra@xxxxxxx> wrote: > > On Fri, 2019-06-21 at 14:46 -0700, Atish Patra wrote: >> On Fri, 2019-06-21 at 14:18 -0500, Troy Benjegerdes wrote: >>> Can you post the fsbl and other images you used to boot/test this? >>> >> > > Resending it without the attachment. Obviously, the mail did not go > through with the binary blob attached :( :(. My bad. > > Let me know if you still want me to share the binary with you. I will > probably share it via some other method. The bl came through as it was sent direct to me, and I can deal with the tftp config manually. I have a kernel image, but not the boot.scr.uimg that it looks like you are using. Is that from Yocto? > >> I have not changed fsbl. It's the default one came with the board. >> Here are the heads of OpenSBI + U-Boot + Linux repo. >> >> OpenSBI: cd2dfdc870ed (master) >> U-boot: 77f6e2dd0551 + Anup's patch series (v4) >> https://github.com/atishp04/u-boot/tree/unleashed_working >> >> Linux: bed3c0d84e7e + Yash's Macb Series + this patch >> https://github.com/atishp04/linux/tree/5.2-rc6-pre >> >> I have also attached the OpenSBI + U-boot binary as well. But this is >> pre-configured with my tftpboot server. You need to change that. >> >>> I keep running into various failures when I build from source and I >>> want to rule out potential hardware issues related to clock and/or >>> ddr initialization >>> >>> On Fri, Jun 21, 2019, 2:14 PM Atish Patra <Atish.Patra@xxxxxxx> >>> wrote: >>>> On Fri, 2019-06-21 at 16:23 +0530, Yash Shah wrote: >>>>> DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver >>>> added >>>>> Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx> >>>>> --- >>>>> arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 16 >>>>> ++++++++++++++++ >>>>> arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 9 >>>> +++++++++ >>>>> 2 files changed, 25 insertions(+) >>>>> >>>>> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi >>>>> b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi >>>>> index 4e8fbde..c53b4ea 100644 >>>>> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi >>>>> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi >>>>> @@ -225,5 +225,21 @@ >>>>> #address-cells = <1>; >>>>> #size-cells = <0>; >>>>> }; >>>>> + eth0: ethernet@10090000 { >>>>> + compatible = "sifive,fu540-macb"; >>>>> + interrupt-parent = <&plic0>; >>>>> + interrupts = <53>; >>>>> + reg = <0x0 0x10090000 0x0 0x2000 >>>>> + 0x0 0x100a0000 0x0 0x1000>; >>>>> + reg-names = "control"; >>>>> + status = "disabled"; >>>>> + local-mac-address = [00 00 00 00 00 00]; >>>>> + clock-names = "pclk", "hclk"; >>>>> + clocks = <&prci PRCI_CLK_GEMGXLPLL>, >>>>> + <&prci PRCI_CLK_GEMGXLPLL>; >>>>> + #address-cells = <1>; >>>>> + #size-cells = <0>; >>>>> + }; >>>>> + >>>>> }; >>>>> }; >>>>> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed- >>>>> a00.dts >>>>> b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts >>>>> index 4da8870..d783bf2 100644 >>>>> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts >>>>> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts >>>>> @@ -63,3 +63,12 @@ >>>>> disable-wp; >>>>> }; >>>>> }; >>>>> + >>>>> +ð0 { >>>>> + status = "okay"; >>>>> + phy-mode = "gmii"; >>>>> + phy-handle = <&phy1>; >>>>> + phy1: ethernet-phy@0 { >>>>> + reg = <0>; >>>>> + }; >>>>> +}; >>>> >>>> Thanks. I am able to boot Unleashed with networking enabled with >>>> this >>>> patch. >>>> >>>> FWIW, >>>> Tested-by: Atish Patra <atish.patra@xxxxxxx> >>>> >>>> Regards, >>>> Atish >>>> _______________________________________________ >>>> linux-riscv mailing list >>>> linux-riscv@xxxxxxxxxxxxxxxxxxx >>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
