On Fri, 2019-06-21 at 14:46 -0700, Atish Patra wrote: > On Fri, 2019-06-21 at 14:18 -0500, Troy Benjegerdes wrote: > > Can you post the fsbl and other images you used to boot/test this? > > > Resending it without the attachment. Obviously, the mail did not go through with the binary blob attached :( :(. My bad. Let me know if you still want me to share the binary with you. I will probably share it via some other method. > I have not changed fsbl. It's the default one came with the board. > Here are the heads of OpenSBI + U-Boot + Linux repo. > > OpenSBI: cd2dfdc870ed (master) > U-boot: 77f6e2dd0551 + Anup's patch series (v4) > https://github.com/atishp04/u-boot/tree/unleashed_working > > Linux: bed3c0d84e7e + Yash's Macb Series + this patch > https://github.com/atishp04/linux/tree/5.2-rc6-pre > > I have also attached the OpenSBI + U-boot binary as well. But this is > pre-configured with my tftpboot server. You need to change that. > > > I keep running into various failures when I build from source and I > > want to rule out potential hardware issues related to clock and/or > > ddr initialization > > > > On Fri, Jun 21, 2019, 2:14 PM Atish Patra <Atish.Patra@xxxxxxx> > > wrote: > > > On Fri, 2019-06-21 at 16:23 +0530, Yash Shah wrote: > > > > DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver > > > added > > > > Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx> > > > > --- > > > > arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 16 > > > > ++++++++++++++++ > > > > arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 9 > > > +++++++++ > > > > 2 files changed, 25 insertions(+) > > > > > > > > diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi > > > > b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi > > > > index 4e8fbde..c53b4ea 100644 > > > > --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi > > > > +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi > > > > @@ -225,5 +225,21 @@ > > > > #address-cells = <1>; > > > > #size-cells = <0>; > > > > }; > > > > + eth0: ethernet@10090000 { > > > > + compatible = "sifive,fu540-macb"; > > > > + interrupt-parent = <&plic0>; > > > > + interrupts = <53>; > > > > + reg = <0x0 0x10090000 0x0 0x2000 > > > > + 0x0 0x100a0000 0x0 0x1000>; > > > > + reg-names = "control"; > > > > + status = "disabled"; > > > > + local-mac-address = [00 00 00 00 00 00]; > > > > + clock-names = "pclk", "hclk"; > > > > + clocks = <&prci PRCI_CLK_GEMGXLPLL>, > > > > + <&prci PRCI_CLK_GEMGXLPLL>; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + }; > > > > + > > > > }; > > > > }; > > > > diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed- > > > > a00.dts > > > > b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > > > > index 4da8870..d783bf2 100644 > > > > --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > > > > +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > > > > @@ -63,3 +63,12 @@ > > > > disable-wp; > > > > }; > > > > }; > > > > + > > > > +ð0 { > > > > + status = "okay"; > > > > + phy-mode = "gmii"; > > > > + phy-handle = <&phy1>; > > > > + phy1: ethernet-phy@0 { > > > > + reg = <0>; > > > > + }; > > > > +}; > > > > > > Thanks. I am able to boot Unleashed with networking enabled with > > > this > > > patch. > > > > > > FWIW, > > > Tested-by: Atish Patra <atish.patra@xxxxxxx> > > > > > > Regards, > > > Atish > > > _______________________________________________ > > > linux-riscv mailing list > > > linux-riscv@xxxxxxxxxxxxxxxxxxx > > > http://lists.infradead.org/mailman/listinfo/linux-riscv
