On Mon, May 27, 2019 at 06:19:35PM +0200, Leif Middelschulte wrote: > This driver too supports coordinate inversion on X,Y axes and > axes swapping via the common properties defined in touchscreen.txt > > Signed-off-by: Leif Middelschulte <leif.middelschulte@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/input/touchscreen/stmpe.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt > index aee1abf06ddb..09d2d4f288cc 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt > @@ -42,6 +42,10 @@ Optional properties: > The given window also affects the value range (limits) set > within the input subsystem which, in turn, affects > the input resolution calculation on both axes. > +- touchscreen-inverted-x: X axis is inverted (boolean) > +- touchscreen-inverted-y: Y axis is inverted (boolean) > +- touchscreen-swapped-x-y: X and Y axis are swapped (boolean) > + Swapping is done after inverting the axis Just reference common definition. > - touchscreen-x-mm : horizontal length in mm of the touchscreen. It affects > the input resolution calculation on the horizontal axis. > - touchscreen-y-mm : vertical length in mm of the touchscreen. It affects > -- > 2.21.0 >
