This driver too supports coordinate inversion on X,Y axes and axes swapping via the common properties defined in touchscreen.txt Signed-off-by: Leif Middelschulte <leif.middelschulte@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/input/touchscreen/stmpe.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index aee1abf06ddb..09d2d4f288cc 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -42,6 +42,10 @@ Optional properties: The given window also affects the value range (limits) set within the input subsystem which, in turn, affects the input resolution calculation on both axes. +- touchscreen-inverted-x: X axis is inverted (boolean) +- touchscreen-inverted-y: Y axis is inverted (boolean) +- touchscreen-swapped-x-y: X and Y axis are swapped (boolean) + Swapping is done after inverting the axis - touchscreen-x-mm : horizontal length in mm of the touchscreen. It affects the input resolution calculation on the horizontal axis. - touchscreen-y-mm : vertical length in mm of the touchscreen. It affects -- 2.21.0
