Dear all A gentle reminder to get your feedbacks on the series below. Best regards Gérald > -----Original Message----- > From: Gerald BAEZA <gerald.baeza@xxxxxx> > Sent: lundi 20 mai 2019 17:27 > To: will.deacon@xxxxxxx; mark.rutland@xxxxxxx; robh+dt@xxxxxxxxxx; > mcoquelin.stm32@xxxxxxxxx; Alexandre TORGUE > <alexandre.torgue@xxxxxx>; corbet@xxxxxxx; linux@xxxxxxxxxxxxxxx; > olof@xxxxxxxxx; horms+renesas@xxxxxxxxxxxx; arnd@xxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > linux-doc@xxxxxxxxxxxxxxx; Gerald BAEZA <gerald.baeza@xxxxxx> > Subject: [PATCH v2 0/5] stm32-ddr-pmu driver creation > > The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1 > SOC. > > This series adds support for the DDRPERFM via a new stm32-ddr-pmu driver, > registered into the perf framework. > > This driver is inspired from arch/arm/mm/cache-l2x0-pmu.c > > --- > Changes from v1: > - add 'resets' description (bindings) and using (driver). Thanks Rob. > - rebase on 5.2-rc1 (that includes the ddrperfm clock control patch). > > Gerald Baeza (5): > Documentation: perf: stm32: ddrperfm support > dt-bindings: perf: stm32: ddrperfm support > perf: stm32: ddrperfm driver creation > ARM: configs: enable STM32_DDR_PMU > ARM: dts: stm32: add ddrperfm on stm32mp157c > > .../devicetree/bindings/perf/stm32-ddr-pmu.txt | 20 + > Documentation/perf/stm32-ddr-pmu.txt | 41 ++ > arch/arm/boot/dts/stm32mp157c.dtsi | 9 + > arch/arm/configs/multi_v7_defconfig | 1 + > drivers/perf/Kconfig | 6 + > drivers/perf/Makefile | 1 + > drivers/perf/stm32_ddr_pmu.c | 512 +++++++++++++++++++++ > 7 files changed, 590 insertions(+) > create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr- > pmu.txt > create mode 100644 Documentation/perf/stm32-ddr-pmu.txt > create mode 100644 drivers/perf/stm32_ddr_pmu.c > > -- > 2.7.4
