RE: [EXT] [PATCH 2/3] scsi: ufs: Allow resetting the UFS device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Bjorn

>Acquire the device-reset GPIO and toggle this to reset the UFS device during
>initialization and host reset.
>
>+/**
>+ ufshcd_device_reset() - toggle the (optional) device reset line
>+ * @hba: per-adapter instance
>+ *
>+ * Toggles the (optional) reset line to reset the attached device.
>+ */
>+static void ufshcd_device_reset(struct ufs_hba *hba) {
>+	/*
>+	 * The USB device shall detect reset pulses of 1us, sleep for 10us to
>+	 * be on the safe side.
>+	 */
>+	gpiod_set_value_cansleep(hba->device_reset, 1);
>+	usleep_range(10, 15);
>+
>+	gpiod_set_value_cansleep(hba->device_reset, 0);
>+	usleep_range(10, 15);
>+}
>+
> /**
>  * ufshcd_host_reset_and_restore - reset and restore host controller
>  * @hba: per-adapter instance
>@@ -6159,6 +6179,9 @@ static int ufshcd_reset_and_restore(struct ufs_hba
>*hba)
> 	int retries = MAX_HOST_RESET_RETRIES;
>
> 	do {
>+		/* Reset the attached device */
>+		ufshcd_device_reset(hba);
>+

what's problem you met, and you should reset UFS device here? could you give more info?

It is true that we don't reset UFS device in case of device fatal error. According to UFS host spec,
Host should be device reset except that in addition to resetting UIC. But as so far,
We didn't experience any problems result from this missing reset.

We have three UFS device reset ways.  Comparing to this hardware reset, 
I prefer to use DME_ENDPOINTRESET.req software reset.


> 		err = ufshcd_host_reset_and_restore(hba);
> 	} while (err && --retries);
>
>@@ -7355,6 +7378,18 @@ static void ufshcd_variant_hba_exit(struct ufs_hba
>*hba)
> 	ufshcd_vops_exit(hba);
> }
>
>+static int ufshcd_init_device_reset(struct ufs_hba *hba) {
>+	hba->device_reset = devm_gpiod_get_optional(hba->dev, "device-
>reset",
>+						    GPIOD_OUT_HIGH);
>+	if (IS_ERR(hba->device_reset)) {
>+		dev_err(hba->dev, "failed to acquire reset gpio: %ld\n",
>+			PTR_ERR(hba->device_reset));
>+	}
>+
>+	return PTR_ERR_OR_ZERO(hba->device_reset);
>+}
>+
> static int ufshcd_hba_init(struct ufs_hba *hba)  {
> 	int err;
>@@ -7394,9 +7429,15 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
> 	if (err)
> 		goto out_disable_vreg;
>
>+	err = ufshcd_init_device_reset(hba);
>+	if (err)
>+		goto out_disable_variant;
>+
> 	hba->is_powered = true;
> 	goto out;
>
>+out_disable_variant:
>+	ufshcd_vops_setup_regulators(hba, false);
> out_disable_vreg:
> 	ufshcd_setup_vreg(hba, false);
> out_disable_clks:
>@@ -8290,6 +8331,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem
>*mmio_base, unsigned int irq)
> 		goto exit_gating;
> 	}
>
>+	/* Reset the attached device */
>+	ufshcd_device_reset(hba);
>+
> 	/* Host controller enable */
> 	err = ufshcd_hba_enable(hba);
> 	if (err) {
>diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index
>ecfa898b9ccc..d8be67742168 100644
>--- a/drivers/scsi/ufs/ufshcd.h
>+++ b/drivers/scsi/ufs/ufshcd.h
>@@ -72,6 +72,8 @@
> #define UFSHCD "ufshcd"
> #define UFSHCD_DRIVER_VERSION "0.2"
>
>+struct gpio_desc;
>+
> struct ufs_hba;
>
> enum dev_cmd_type {
>@@ -706,6 +708,8 @@ struct ufs_hba {
>
> 	struct device		bsg_dev;
> 	struct request_queue	*bsg_queue;
>+
>+	struct gpio_desc *device_reset;
> };
>
> /* Returns true if clocks can be gated. Otherwise false */
>--
>2.18.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux