Re: [PATCH v2 00/17] net: introduce Qualcomm IPA driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/3/19 9:54 AM, Dan Williams wrote:
>> To be perfectly honest, at first I thought having IPA use rmnet
>> was a cargo cult thing like Dan suggested, because I didn't see
> To be clear I only meant cargo-culting the naming, not any
> functionality. Clearly IPA/rmnet/QMAP are pretty intimately connected
> at this point. But this goes back to whether IPA needs a netdev itself
> or whether you need an rmnet device created on top. If the former then
> I'd say no cargo-culting, if the later then it's a moot point because
> the device name will be rmnet%d anyway.

OK I thought you weren't sure why rmnet was a layer at all.  As I
said, I didn't have a very good understanding of why it was even
needed when I first started working on this.

I can't (or won't) comment right now on whether IPA needs its own
netdev for rmnet to use.  The IPA endpoints used for the modem
network interfaces are enabled when the netdev is opened and
disabled when closed.  Outside of that, TX and RX are pretty
much immediately passed through to the layer below or above.
IPA currently has no other net device operations.

					-Alex



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux