Hi Adrian & Ulf, On Mon, 20 May 2019 at 18:12, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote: > > This patch set adds optional clock support, HS400 enhanced strobe mode support, > PHY DLL configuration and other optimization to make the SD host controller > can work well on the Spreadtrum SC9860 platform. Do you have any comments for this patch set? Thanks. > > Baolin Wang (9): > mmc: sdhci-sprd: Check the enable clock's return value correctly > dt-bindings: mmc: sprd: Add another optional clock documentation > mmc: sdhci-sprd: Add optional gate clock support > mmc: sdhci-sprd: Implement the get_max_timeout_count() interface > mmc: sdhci-sprd: Add HS400 enhanced strobe mode > mmc: sdhci-sprd: Enable PHY DLL to make clock stable > dt-bindings: mmc: sprd: Add PHY DLL delay documentation > mmc: sdhci-sprd: Add PHY DLL delay configuration > arm64: dts: sprd: Add Spreadtrum SD host controller support > > .../devicetree/bindings/mmc/sdhci-sprd.txt | 19 +++ > arch/arm64/boot/dts/sprd/whale2.dtsi | 35 ++++ > drivers/mmc/host/sdhci-sprd.c | 171 +++++++++++++++++++- > 3 files changed, 217 insertions(+), 8 deletions(-) > > -- > 1.7.9.5 > -- Baolin Wang Best Regards
