Hello, On Mon, May 27, 2019 at 06:22:31PM +0200, megous via linux-sunxi wrote: > From: Ondrej Jirman <megous@xxxxxxxxxx> > > This series implements support for Xunlong Orange Pi 3 board. > > Unfortunately, this board needs some small driver patches, so I have > split the boards DT patch into chunks that require patches for drivers > in various subsystems. > > Suggested merging plan/dependencies: > > - stmmac patches are needed for ethernet support (patches 1-3) > - these should be ready now > - HDMI support (patches 4-6) > - should be ready If there are no futher comments, can all these patches please be merged? thank you and kind regards, Ondrej > Changes in v2: > - added dt-bindings documentation for the board's compatible string > (suggested by Clement) > - addressed checkpatch warnings and code formatting issues (on Maxime's > suggestions) > - stmmac: dropped useless parenthesis, reworded description of the patch > (suggested by Sergei) > - drop useles dev_info() about the selected io bias voltage > - docummented io voltage bias selection variant macros > - wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE", > because wifi depends on H6 RTC support that's not merged yet (suggested > by Clement) > - added missing signed-of-bys > - changed &usb2otg dr_mode to otg, and added a note about VBUS > - improved wording of HDMI driver's DDC power supply patch > > Changes in v3: > - dropped already applied patches > - changed pinctrl I/O bias selection constants to enum and renamed > - added /omit-if-no-ref/ to mmc1_pins > - made mmc1_pins default pinconf for mmc1 in H6 dtsi > - move ddc-supply to HDMI connector node, updated patch descriptions, > changed dt-bindings docs > > Changes in v4: > - fix checkpatch warnings/style issues > - use enum in struct sunxi_desc_function for io_bias_cfg_variant > - collected acked-by's > - fix compile error in drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c:156 > caused by missing conversion from has_io_bias_cfg struct member > (I've kept the acked-by, because it's a trivial change, but feel free > to object.) (reported by Martin A. on github) > I did not have A80 pinctrl enabled for some reason, so I did not catch > this sooner. > - dropped brcm firmware patch (was already applied) > - dropped the wifi dts patch (will re-send after H6 RTC gets merged, > along with bluetooth support, in a separate series) > > Changes in v5: > - dropped already applied patches (pinctrl patches, mmc1 pinconf patch) > - rename GMAC-3V3 -> GMAC-3V to match the schematic (Jagan) > - changed hdmi-connector's ddc-supply property to ddc-en-gpios > (Rob Herring) > > Changes in v6: > - added dt-bindings reviewed-by tag > - fix wording in stmmac commit (as suggested by Sergei) > > Please take a look. > > thank you and regards, > Ondrej Jirman > > Icenowy Zheng (2): > net: stmmac: sun8i: add support for Allwinner H6 EMAC > net: stmmac: sun8i: force select external PHY when no internal one > > Ondrej Jirman (4): > arm64: dts: allwinner: orange-pi-3: Enable ethernet > dt-bindings: display: hdmi-connector: Support DDC bus enable > drm: sun4i: Add support for enabling DDC I2C bus to sun8i_dw_hdmi glue > arm64: dts: allwinner: orange-pi-3: Enable HDMI output > > .../display/connector/hdmi-connector.txt | 1 + > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 70 +++++++++++++++++++ > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 55 ++++++++++++++- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 3 + > .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 ++++++ > 5 files changed, 147 insertions(+), 3 deletions(-) > > -- > 2.21.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190527162237.18495-1-megous%40megous.com. > For more options, visit https://groups.google.com/d/optout.
