Hi,
On Wed, 29 May 2019 at 09:19, Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Tue, May 28, 2019 at 08:04:47PM +0200, Ondřej Jirman wrote:
> > Hello Clément,
> >
> > On Tue, May 28, 2019 at 06:21:19PM +0200, Clément Péron wrote:
> > > Hi Ondřej,
> > >
> > > On Mon, 27 May 2019 at 21:53, 'Ondřej Jirman' via linux-sunxi
> > > <linux-sunxi@xxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > Hi Clément,
> > > >
> > > > On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> > > > > Hi Clément,
> > > > >
> > > > > On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > > > > > Hi Ondrej,
> > > > > >
> > > > > > >
> > > > > > > I'm testing on Orange Pi 3.
> > > > > > >
> > > > > > > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> > > > > > > responding/serial console stops responding). I don't have RC controller to test
> > > > > > > the CIR. But just enabling the CIR causes kernel to hang shortly after boot.
> > > > > > >
> > > > > > > I tried booting multiple times. Other results:
> > > > > > >
> > > > > > > boot 2:
> > > > > > >
> > > > > > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > > > > > >
> > > > > > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
> > > > > > > dwmac-sun8i 5020000.ethernet eth0: Reset adapter.
> > > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 5696 jiffies s: 81 root: 0x1/.
> > > > > > > rcu: blocking rcu_node structures:
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
> > > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 21568 jiffies s: 81 root: 0x1/.
> > > > > > > rcu: blocking rcu_node structures:
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=17203
> > > > > > >
> > > > > > > above messages appear regularly.
> > > > > > >
> > > > > > > boot 3:
> > > > > > >
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
> > > > > > >
> > > > > > >
> > > > > > > Sometimes serial console keeps working. Sometimes it locks up too (but not
> > > > > > > frequently). Storage locks up always (any program that was not run before
> > > > > > > the crash can't be started and lock up the kernel hard, programs that
> > > > > > > were executed prior, can be run again).
> > > > > > >
> > > > > > >
> > > > > > > Exactly the same kernel build on H5 seems to work (or at least I was not able to
> > > > > > > trigger the crash). So this seems to be limited to H6 for now.
> > > > > > >
> > > > > > > I suspect that the crash occurs sooner if I vary the light (turn on/off the table
> > > > > > > lamp light).
> > > > > > >
> > > > > > > Without your patches, everything works fine on H6, and I never see
> > > > > > > crashes/lockups.
> > > > > > >
> > > > > > > I tired physically covering the IR receiver, and that helps preventing the
> > > > > > > crash. As soon as I uncover it, the crash happens again in 1s or so:
> > > > > > >
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu: 0-....: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
> > > > > > >
> > > > > > > This time I got the hung task and reboot: (probably not directly related)
> > > > > > >
> > > > > > > INFO: task find:560 blocked for more than 120 seconds.
> > > > > > > Not tainted 5.2.0-rc2+ #7
> > > > > > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > > > > > > find D 0 560 551 0x00000000
> > > > > > > Call trace:
> > > > > > > __switch_to+0x6c/0x90
> > > > > > > __schedule+0x1f4/0x578
> > > > > > > schedule+0x28/0xa8
> > > > > > > io_schedule+0x18/0x38
> > > > > > > __lock_page+0x12c/0x208
> > > > > > > pagecache_get_page+0x238/0x2e8
> > > > > > > __get_node_page+0x6c/0x310
> > > > > > > f2fs_get_node_page+0x14/0x20
> > > > > > > f2fs_iget+0x70/0xc60
> > > > > > > f2fs_lookup+0xcc/0x218
> > > > > > > __lookup_slow+0x78/0x160
> > > > > > > lookup_slow+0x3c/0x60
> > > > > > > walk_component+0x1e4/0x2e0
> > > > > > > path_lookupat.isra.13+0x5c/0x1e0
> > > > > > > filename_lookup.part.23+0x6c/0xe8
> > > > > > > user_path_at_empty+0x4c/0x60
> > > > > > > vfs_statx+0x78/0xd8
> > > > > > > __se_sys_newfstatat+0x24/0x48
> > > > > > > __arm64_sys_newfstatat+0x18/0x20
> > > > > > > el0_svc_handler+0x9c/0x170
> > > > > > > el0_svc+0x8/0xc
> > > > > > > Kernel panic - not syncing: hung_task: blocked tasks
> > > > > > > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > > > > > > Hardware name: OrangePi 3 (DT)
> > > > > > > Call trace:
> > > > > > > dump_backtrace+0x0/0xf8
> > > > > > > show_stack+0x14/0x20
> > > > > > > dump_stack+0xa8/0xcc
> > > > > > > panic+0x124/0x2dc
> > > > > > > proc_dohung_task_timeout_secs+0x0/0x40
> > > > > > > kthread+0x120/0x128
> > > > > > > ret_from_fork+0x10/0x18
> > > > > > > SMP: stopping secondary CPUs
> > > > > > > Kernel Offset: disabled
> > > > > > > CPU features: 0x0002,20002000
> > > > > > > Memory Limit: none
> > > > > > > Rebooting in 3 seconds..
> > > > > > >
> > > > > > >
> > > > > > > Meanwhile H5 based board now runs for 15 minutes without issues.
> > > > > > >
> > > > > > > So to sum up:
> > > > > > >
> > > > > > > - these crashes are definitely H6 IR related
> > > > > > > - the same kernel, on H5 works
> > > > > > > - covering the sensor prevents the crashes on H6
> > > > > > >
> > > > > > > So we should probably hold on with the series, until this is figured out.
> > > > > >
> > > > > > Thanks for testing, but I think it's more hardware related.
> > > > > > It seems that your IR is flooded or misconfigured for your board.
> > > > > > Could you add a simple print in the "sunxi_ir_irq"
> > > > >
> > > > > Yes, I get flood of IRQs with status = 0x30. (after I turn on the lamp,
> > > > > but it persists even after I turn it off and cover the IR sensor).
> > > >
> > > > Interestingly, status also contains RAC, and it's 0 in this case. So the
> > > > interrupt if firing with "No available data in RX FIFO" repeatedly. Regardless
> > > > of input.
> > > >
> > > > So there's something else up.
> > >
> > > Really weird indeed...
> > >
> > > I have pushed a new version, where I didn't enabled the support for
> > > others H6 board and the cover letter include a link to this thread.
> > >
> > > It would be great if other sunxi users could test this series, to
> > > check if this issue in present in other OPi3 / Pine H64.
> >
> > I don't know if this is enough. I'd rather prefer if the driver has a way
> > of detecting this situation and shutting the module down, at the very least,
> > instead of taking down the entire system with IRQ flood.
> >
> > It may be detectable by checking RAC == 0 when RX FIFO available interrupt
> > flag is set.
> >
> > Otherwise, this will eventually be forgotten (cover letters are not even stored
> > in git), and someone will fall into the trap again, after enabling r_ir on
> > their board, and end up chasing their tail for a day. I've initially only found
> > this is IR driver issue after a long unpleasant debugging session, chasing other
> > more obvious ideas (as when this happens there's absolutely nothing in the log
> > indicating this is IR issue).
>
> Returning IRQ_NONE in the handler will disable the interrupt line
> after 100,000 (I think?) occurences. That might be a good workaround,
> but we definitely want to have a comment there :)
>
Thanks for the suggestion,
I will propose a patch to return IRQ_NONE if Fifo is empty when RA is setted.
Just a comment in the IRQ handling we are actually looking at the
RXSTA register and using the RXINT bit ?
Is there any reason for doing that ?
Thanks,
Clément
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
