HI Shawn, > -----Original Message----- > From: Shawn Guo <shawnguo@xxxxxxxxxx> > Sent: Thursday, 23 May, 2019 06:18 PM > To: Pankaj Bansal <pankaj.bansal@xxxxxxx> > Cc: Leo Li <leoyang.li@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Rajesh > Bhagat <rajesh.bhagat@xxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx > Subject: Re: [PATCH] arm64: dts: fsl: ls1046: Modify the qspi flash frequency > > On Tue, May 21, 2019 at 09:40:09AM +0000, Pankaj Bansal wrote: > > The qspi flash in ls1046a based QDS and RDB boards can operate at > > 50MHz frequency. > > Therefore, update the maximum supported freq in their respective dts > > files. > > > > Signed-off-by: Pankaj Bansal <pankaj.bansal@xxxxxxx> > > Do not use base64 encoding for patch posting. I did not understand this comment? Do you want me to change something in patch? I had run checkpatch script on the patch before sending and it did not report any waning or error. Can this patch not be merged in current tree ? > > Shawn > > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 4 ++-- > > arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 5 +++-- > > 2 files changed, 5 insertions(+), 4 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > index eec62c63dafe..e441dbfbfb81 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > @@ -3,7 +3,7 @@ > > * Device Tree Include file for Freescale Layerscape-1046A family SoC. > > * > > * Copyright 2016 Freescale Semiconductor, Inc. > > - * Copyright 2018 NXP > > + * Copyright 2018-2019 NXP > > * > > * Shaohui Xie <Shaohui.Xie@xxxxxxx> > > */ > > @@ -169,7 +169,7 @@ > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > - spi-max-frequency = <20000000>; > > + spi-max-frequency = <50000000>; > > spi-rx-bus-width = <4>; > > spi-tx-bus-width = <4>; > > reg = <0>; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > index 6a6514d0e5a9..6f5411d09bb9 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > @@ -3,6 +3,7 @@ > > * Device Tree Include file for Freescale Layerscape-1046A family SoC. > > * > > * Copyright 2016 Freescale Semiconductor, Inc. > > + * Copyright 2019 NXP > > * > > * Mingkai Hu <mingkai.hu@xxxxxxx> > > */ > > @@ -105,7 +106,7 @@ > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > - spi-max-frequency = <20000000>; > > + spi-max-frequency = <50000000>; > > spi-rx-bus-width = <4>; > > spi-tx-bus-width = <4>; > > reg = <0>; > > @@ -115,7 +116,7 @@ > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > - spi-max-frequency = <20000000>; > > + spi-max-frequency = <50000000>; > > spi-rx-bus-width = <4>; > > spi-tx-bus-width = <4>; > > reg = <1>; > > -- > > 2.17.1 > >
