On Thu, May 23, 2019 at 08:54:00AM +0200, Torsten Duwe wrote: > From: Icenowy Zheng <icenowy@xxxxxxx> > > The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed > for portable devices. > > Add a binding document for it. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Torsten Duwe <duwe@xxxxxxx> > --- > .../bindings/display/bridge/anx6345.txt | 56 +++++++++++++++++++ > 1 file changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt > new file mode 100644 > index 000000000000..e79a11348d11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt > @@ -0,0 +1,56 @@ > +Analogix ANX6345 eDP Transmitter > +-------------------------------- > + > +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for > +portable devices. > + > +Required properties: > + > + - compatible : "analogix,anx6345" > + - reg : I2C address of the device > + - reset-gpios : Which GPIO to use for reset > + - dvdd12-supply : Regulator for 1.2V digital core power. > + - dvdd25-supply : Regulator for 2.5V digital core power. > + > +Optional properties: > + > + - Video ports for RGB input and eDP output using the DT bindings > + defined in [1] The output node can be optional, but the input one is probably going to be needed all the time, since otherwise you won't be able to fill the output port of the upstream device in the graph. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
