Hi Matthias, On 09/04/2014 19:45, Matthias Brugger wrote: > Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx> > --- > arch/arm/Kconfig.debug | 49 +++++++++++++++++++++++++++++++++++-- > arch/arm/include/debug/mediatek.S | 38 ++++++++++++++++++++++++++++ > 2 files changed, 85 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/include/debug/mediatek.S > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 4a2fc0b..dc51495 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -797,6 +797,38 @@ choice > Say Y here if you want kernel low-level debugging support > on Ux500 based platforms. > > + config DEBUG_MTK6589_UART0 > + depends on ARCH_MEDIATEK > + bool "Mediatek mt6589 UART0" > + select DEBUG_UART_MEDIATEK > + help > + Say Y here if you want kernel low-level debugging support > + on Mediatek mt6589 based platforms. > + > + config DEBUG_MTK6589_UART1 > + depends on ARCH_MEDIATEK > + bool "Mediatek mt6589 UART1" > + select DEBUG_UART_MEDIATEK > + help > + Say Y here if you want kernel low-level debugging support > + on Mediatek mt6589 based platforms. > + > + config DEBUG_MTK6589_UART2 > + depends on ARCH_MEDIATEK > + bool "Mediatek mt6589 UART2" > + select DEBUG_UART_MEDIATEK > + help > + Say Y here if you want kernel low-level debugging support > + on Mediatek mt6589 based platforms. > + > + config DEBUG_MTK6589_UART3 > + depends on ARCH_MEDIATEK > + bool "Mediatek mt6589 UART3" > + select DEBUG_UART_MEDIATEK > + help > + Say Y here if you want kernel low-level debugging support > + on Mediatek mt6589 based platforms. > + > config DEBUG_VEXPRESS_UART0_DETECT > bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" > depends on ARCH_VEXPRESS && CPU_CP15_MMU > @@ -954,6 +986,10 @@ config DEBUG_MSM_UART > bool > depends on ARCH_MSM || ARCH_QCOM > > +config DEBUG_UART_MEDIATEK > + bool > + depends on ARCH_MEDIATEK > + > config DEBUG_LL_INCLUDE > string > default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 > @@ -971,6 +1007,7 @@ config DEBUG_LL_INCLUDE > DEBUG_IMX53_UART ||\ > DEBUG_IMX6Q_UART || \ > DEBUG_IMX6SL_UART > + default "debug/mediatek.S" if DEBUG_UART_MEDIATEK > default "debug/msm.S" if DEBUG_MSM_UART > default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART > default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 > @@ -1043,6 +1080,10 @@ config DEBUG_UART_PHYS > default 0xd0012000 if DEBUG_MVEBU_UART > default 0xd4017000 if DEBUG_MMP_UART2 > default 0xd4018000 if DEBUG_MMP_UART3 it seems that this symbol are sorted by address so your symbols should go just after the line default 0x101fb000 if DEBUG_NOMADIK_UART > + default 0x11006000 if DEBUG_MTK6589_UART0 > + default 0x11007000 if DEBUG_MTK6589_UART1 > + default 0x11008000 if DEBUG_MTK6589_UART2 > + default 0x11009000 if DEBUG_MTK6589_UART3 > default 0xe0000000 if ARCH_SPEAR13XX > default 0xf0000be0 if ARCH_EBSA110 > default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE > @@ -1058,7 +1099,7 @@ config DEBUG_UART_PHYS > default 0xfffff700 if ARCH_IOP33X > depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ > DEBUG_LL_UART_EFM32 || \ > - DEBUG_UART_8250 || DEBUG_UART_PL01X > + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_UART_MEDIATEK > > config DEBUG_UART_VIRT > hex "Virtual base address of debug UART" > @@ -1087,6 +1128,10 @@ config DEBUG_UART_VIRT > default 0xfe012000 if ARCH_ORION5X > default 0xfe017000 if DEBUG_MMP_UART2 > default 0xfe018000 if DEBUG_MMP_UART3 > + default 0xF1006000 if DEBUG_MTK6589_UART0 > + default 0xF1007000 if DEBUG_MTK6589_UART1 > + default 0xF1008000 if DEBUG_MTK6589_UART2 > + default 0xF1009000 if DEBUG_MTK6589_UART3 > default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART > default 0xfe230000 if DEBUG_PICOXCELL_UART > default 0xfe300000 if DEBUG_BCM_KONA_UART > @@ -1116,7 +1161,7 @@ config DEBUG_UART_VIRT > default 0xff003000 if DEBUG_U300_UART > default DEBUG_UART_PHYS if !MMU > depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ > - DEBUG_UART_8250 || DEBUG_UART_PL01X > + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_UART_MEDIATEK > > config DEBUG_UART_8250_SHIFT > int "Register offset shift for the 8250 debug UART" > diff --git a/arch/arm/include/debug/mediatek.S b/arch/arm/include/debug/mediatek.S > new file mode 100644 > index 0000000..98e8414 > --- /dev/null > +++ b/arch/arm/include/debug/mediatek.S > @@ -0,0 +1,38 @@ > +/* > + * Low-level debug macro for Mediatek SoCs > + * > + * Copyright (c) 2014 MundoReader S.L. > + * Author: Matthias Brugger <matthias.bgg@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +#include <linux/serial_reg.h> > + > + .macro addruart, rp, rv, tmp > + ldr \rp, =CONFIG_DEBUG_UART_PHYS > + ldr \rv, =CONFIG_DEBUG_UART_VIRT > + .endm > + > + .macro senduart,rd,rx > + strb \rd, [\rx, #0x0] What about using a #define instead of numerical value? > + .endm > + > + .macro waituart,rd,rx > +1001: ldr \rd, [\rx, #0x14] ditto > + tst \rd, #0x40 ditto > + beq 1001b > + .endm > + > + .macro busyuart,rd,rx > +1002: ldr \rd, [\rx, #0x14] ditto > + tst \rd, #0x40 ditto > + beq 1002b > + .endm > This file looks very similar to arch/arm/include/debug/pl01x.S, the only difference is the value of some register offsets. Should it be possible to make it configurable and then use the same file? Thanks, Gregory -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html