On Thu, Apr 25, 2019 at 05:34:42PM +0200, Thierry Reding wrote: > From: Thierry Reding <treding@xxxxxxxxxx> > > These power supplies provide power for various PLLs that are set up and > driven by the XUSB pad controller. These power supplies were previously > improperly added to the PCIe and XUSB controllers, but depending on the > driver probe order, power to the PLLs will not be supplied soon enough > and cause initialization to fail. > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> > --- > This was previously reviewed here: > > https://patchwork.ozlabs.org/patch/1077153/ > > .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) Hi Kishon, do you have any comments on this series. It's fairly straightforward but is required in order to make XUSB work properly on Jetson Nano for which support was merged in v5.2-rc1. Thanks, Thierry > > diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > index daedb15f322e..9fb682e47c29 100644 > --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > @@ -42,6 +42,18 @@ Required properties: > - reset-names: Must include the following entries: > - "padctl" > > +For Tegra124: > +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. > +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. > +- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. > +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. > + > +For Tegra210: > +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. > +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. > +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. > +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. > + > For Tegra186: > - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY > power supply. Must supply 1.8 V. > -- > 2.21.0 >
Attachment:
signature.asc
Description: PGP signature
