Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) drivers from devicetree.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
Notes:
v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
added content.
v5: - Edited PWM/watchdog DT bindings documentation to point to the new
document.
- Moved main document to
Documentation/devicetree/bindings/timer/ingenic,tcu.txt
- Updated documentation to reflect the new devicetree bindings.
v6: - Removed PWM/watchdog documentation files as asked by upstream
- Removed doc about properties that should be implicit
- Removed doc about ingenic,timer-channel /
ingenic,clocksource-channel as they are gone
- Fix WDT clock name in the binding doc
- Fix lengths of register areas in watchdog/pwm nodes
v7: No change
v8: - Fix address of the PWM node
- Added doc about system timer and clocksource children nodes
v9: - Remove doc about system timer and clocksource children
nodes...
- Add doc about ingenic,pwm-channels-mask property
v10: No change
v11: Fix info about default value of ingenic,pwm-channels-mask
v12: Drop sub-nodes for now; they will be introduced in a follow-up
patchset.
.../devicetree/bindings/timer/ingenic,tcu.txt | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..d101cd72c9b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,59 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
+==========================================================
+
+For a description of the TCU hardware and drivers, have a look at
+Documentation/mips/ingenic-tcu.txt.
+
+Required properties:
+
+- compatible: Must be one of:
+ * "ingenic,jz4740-tcu"
+ * "ingenic,jz4725b-tcu"
+ * "ingenic,jz4770-tcu"
+- reg: Should be the offset/length value corresponding to the TCU registers
+- clocks: List of phandle & clock specifiers for clocks external to the TCU.
+ The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
+ should be provided if the SoC has it.
+- clock-names: List of name strings for the external clocks.
+- #clock-cells: Should be <1>;
+ Clock consumers specify this argument to identify a clock. The valid values
+ may be found in <dt-bindings/clock/ingenic,tcu.h>.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value should be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Optional properties:
+
+- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
+ Default value is 0xfc.
+
+
+Example
+==========================================================
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+
+/ {
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC
+ &cgu JZ4770_CLK_EXT
+ &cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };
+};
--
2.21.0.593.g511ec345e18
