On Mon, 2019-05-20 at 11:39 -0500, Thor Thayer wrote: > On 5/15/19 11:20 AM, Dalon Westergreen wrote: > > Add the default stmmac ptp_ref clock for stratix10. The stmmac > > driver defaults the ptp_ref clock to the main stmmac clock > > if the ptp_ref clock is not set in the devicetree. This is > > inappropriate for the stratix10. The default ptp_ref clock is > > STRATIX10_PERI_EMAC_PTP_CLK in the clock manager. > > > > Signed-off-by: Dalon Westergreen < > > dalon.westergreen@xxxxxxxxxxxxxxx > > > > > --- > > arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 12 ++++++------ > > 1 file changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > index adedd563125a..f464e7ba3402 100644 > > --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > @@ -160,8 +160,8 @@ > > mac-address = [00 00 00 00 00 00]; > > resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > - clocks = <&clkmgr STRATIX10_EMAC0_CLK>; > > - clock-names = "stmmaceth"; > > + clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr > > STRATIX10_PERI_EMAC_PTP_CLK>; > > + clock-names = "stmmaceth", "ptp_ref"; > > tx-fifo-depth = <16384>; > > rx-fifo-depth = <16384>; > > snps,multicast-filter-bins = <256>; > > @@ -176,8 +176,8 @@ > > mac-address = [00 00 00 00 00 00]; > > resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > - clocks = <&clkmgr STRATIX10_EMAC1_CLK>; > > - clock-names = "stmmaceth"; > > + clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr > > STRATIX10_PERI_EMAC_PTP_CLK>; > > + clock-names = "stmmaceth", "ptp_ref"; > > tx-fifo-depth = <16384>; > > rx-fifo-depth = <16384>; > > snps,multicast-filter-bins = <256>; > > @@ -192,8 +192,8 @@ > > mac-address = [00 00 00 00 00 00]; > > resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > - clocks = <&clkmgr STRATIX10_EMAC2_CLK>; > > - clock-names = "stmmaceth"; > > + clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr > > STRATIX10_PERI_EMAC_PTP_CLK>; > > + clock-names = "stmmaceth", "ptp_ref"; > > tx-fifo-depth = <16384>; > > rx-fifo-depth = <16384>; > > snps,multicast-filter-bins = <256>; > > > > Should STRATIX10_EMAC_PTP_CLK be used instead of > STRATIX10_PERI_EMAC_PTP_CLK since this is the gate of the clkgmr? > Either can be used, but the default in the hps configuration is the peripheral pll output and not the main pll output. --dalon
