Hello, This patchset adds reset controller support for Bitmain BM1880 SoC. BM1880 SoC has only one reset controller and the reset-simple driver has been reused here. This patchset has been tested on 96Boards Sophon Edge board. Thanks, Mani Changes in v3: * Removed the clk-rst part as it turned out be the clock gating register set. Changes in v2: As per review from Philipp: * Reused reset_simple_active_low struct instead of a new one for bm1880 * Splitted the SPDX license change to a separate commit * Added Reviewed-by tags from Rob and Philipp Manivannan Sadhasivam (4): dt-bindings: reset: Add devicetree binding for BM1880 reset controller arm64: dts: bitmain: Add reset controller support for BM1880 SoC reset: Add reset controller support for BM1880 SoC reset: Switch to SPDX license identifier for reset-simple .../bindings/reset/bitmain,bm1880-reset.txt | 18 +++++++ arch/arm64/boot/dts/bitmain/bm1880.dtsi | 11 ++++ drivers/reset/Kconfig | 3 +- drivers/reset/reset-simple.c | 8 ++- .../dt-bindings/reset/bitmain,bm1880-reset.h | 51 +++++++++++++++++++ 5 files changed, 85 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h -- 2.17.1
