Re: [PATCH 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Apr 07, 2014 at 04:54:09PM -0500, tthayer@xxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxx>
> 
> Added EDAC support for reporting ECC errors of CycloneV
> and ArriaV SDRAM controller.
> - The SDRAM Controller registers are used by the FPGA bridge so
>   these are accessed through the syscon interface.
> - The configuration of the SDRAM memory size for the EDAC framework
>   is discovered from the memory node of the device tree.
> - Documentation of the bindings in devicetree/bindings/arm/altera/
>   socfpga-sdram-edac.txt
> - Correction of single bit errors, detection of double bit errors.

Before I go and take a look at this further, is anyone at Altera going
to maintain this driver in case of bug reports and issues with it?

Also, I see patch 3/3. Are the other two related? I see they are
devicetree additions and, as such, all three should go together...

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux