From: Al Cooper <alcooperx@xxxxxxxxx>
The 7211 has a new way of selecting the pull-up/pull-down setting
for a GPIO pin. The registers used for the bcm2837, GP_PUD and
GP_PUDCLKn0, are no longer connected. A new set of registers,
GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add
a new compatible string "brcm,bcm7211-gpio" and the kernel
driver will use it to select which method is used to select
pull-up/pull-down.
Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 85 +++++++++++++++++++++++++--
1 file changed, 80 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 183d1ffe6a75..35d9f9593000 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -57,15 +57,26 @@
#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
#define GPPUD 0x94 /* Pin Pull-up/down Enable */
#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
+#define GP_GPIO_PUP_PDN_CNTRL_REG0 0xe4 /* 7211 Pin Pull-up/down select */
#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
#define FSEL_SHIFT(p) (((p) % 10) * 3)
#define GPIO_REG_OFFSET(p) ((p) / 32)
#define GPIO_REG_SHIFT(p) ((p) % 32)
+#define PUD_7211_MASK 0x3
+#define PUD_7211_REG_OFFSET(p) ((p) / 16)
+#define PUD_7211_REG_SHIFT(p) (((p) % 16) * 2)
+
/* argument: bcm2835_pinconf_pull */
#define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1)
+enum bcm7211_pinconf_pull {
+ BCM7211_PINCONFIG_PULL_NONE,
+ BCM7211_PINCONFIG_PULL_UP,
+ BCM7211_PINCONFIG_PULL_DOWN,
+};
+
struct bcm2835_pinctrl {
struct device *dev;
void __iomem *base;
@@ -975,6 +986,55 @@ static const struct pinconf_ops bcm2835_pinconf_ops = {
.pin_config_set = bcm2835_pinconf_set,
};
+static int bcm7211_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned int pin, unsigned long *configs,
+ unsigned int num_configs)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ u32 param, arg;
+ u32 shifter;
+ u32 value;
+ u32 off;
+ int i;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ if (param != BCM2835_PINCONF_PARAM_PULL)
+ return -EINVAL;
+ arg = pinconf_to_config_argument(configs[i]);
+
+ /* convert to 7211 value */
+ switch (arg) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ arg = BCM7211_PINCONFIG_PULL_NONE;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ arg = BCM7211_PINCONFIG_PULL_DOWN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ arg = BCM7211_PINCONFIG_PULL_UP;
+ break;
+ }
+
+ off = PUD_7211_REG_OFFSET(pin);
+ shifter = PUD_7211_REG_SHIFT(pin);
+
+ value = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 +
+ (off * 4));
+ value &= ~(PUD_7211_MASK << shifter);
+ value |= (arg << shifter);
+ bcm2835_gpio_wr(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4),
+ value);
+ } /* for each config */
+
+ return 0;
+}
+
+static const struct pinconf_ops bcm7211_pinconf_ops = {
+ .pin_config_get = bcm2835_pinconf_get,
+ .pin_config_set = bcm7211_pinconf_set,
+};
+
static struct pinctrl_desc bcm2835_pinctrl_desc = {
.name = MODULE_NAME,
.pins = bcm2835_gpio_pins,
@@ -990,6 +1050,18 @@ static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
.npins = BCM2835_NUM_GPIOS,
};
+static const struct of_device_id bcm2835_pinctrl_match[] = {
+ {
+ .compatible = "brcm,bcm2835-gpio",
+ .data = &bcm2835_pinconf_ops,
+ },
+ {
+ .compatible = "brcm,bcm7211-gpio",
+ .data = &bcm7211_pinconf_ops,
+ },
+ {}
+};
+
static int bcm2835_pinctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -997,6 +1069,8 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
struct bcm2835_pinctrl *pc;
struct resource iomem;
int err, i;
+ const struct of_device_id *match;
+
BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
@@ -1073,6 +1147,12 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
bcm2835_gpio_irq_handler);
}
+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+ if (match) {
+ bcm2835_pinctrl_desc.confops =
+ (const struct pinconf_ops *)match->data;
+ }
+
pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
if (IS_ERR(pc->pctl_dev)) {
gpiochip_remove(&pc->gpio_chip);
@@ -1087,11 +1167,6 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id bcm2835_pinctrl_match[] = {
- { .compatible = "brcm,bcm2835-gpio" },
- {}
-};
-
static struct platform_driver bcm2835_pinctrl_driver = {
.probe = bcm2835_pinctrl_probe,
.driver = {
--
2.17.1
