When not using OTG, the PHY will need to know if it should function as
host or peripheral by checking dr_mode in the PHY node (not the parent
controller node).
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
v2:
* added braces to else statement
* check if dr_mode is "host"
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 1ebb08f8323f..5e5e5e938f80 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -391,6 +391,7 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
+ enum usb_dr_mode mode;
u32 val;
if (channel->uses_usb_x1)
@@ -408,6 +409,13 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
if (rcar_gen3_needs_init_otg(channel))
rcar_gen3_init_otg(channel);
rphy->otg_initialized = true;
+ } else {
+ /* Not OTG, so dr_mode should be set in PHY node */
+ mode = usb_get_dr_mode(channel->dev);
+ if (mode == USB_DR_MODE_HOST)
+ writel(0x00000000, usb2_base + USB2_COMMCTRL);
+ else if (mode == USB_DR_MODE_PERIPHERAL)
+ writel(0x80000000, usb2_base + USB2_COMMCTRL);
}
rphy->initialized = true;
--
2.16.1
