Add dtsi for iMX6 Quad/Dual based SMARC SoM's from Kontron.
The differences between the quad/dual and the dual-lite/solo are:
* quad/dual has a 2nd IPU
* quad/dual has three chip selects for SMARC SPI0 interface
* quad/dual has a pcie_wake# signal
Only the 3th spi-cs signal is added by this commit.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi | 36 +++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..2618eccfe50d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@xxxxxxxxxxxxxx>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Kontron SMARC sAMX6i Quad/Dual";
+ compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
+
+/* Quad/Dual SoMs have 3 chip-select signals */
+&ecspi4 {
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
+ <&gpio3 29 GPIO_ACTIVE_HIGH>,
+ <&gpio3 25 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl_ecspi4 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+ /* SPI4_IMX_CS2# - connected to internal flash */
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+ /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+ /* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
+ >;
+};
--
2.20.1
