i.MX8MM has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6b407a94..f32d4e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -206,6 +206,7 @@ reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -217,6 +218,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -228,6 +230,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -239,6 +242,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -250,6 +254,7 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; -- 2.7.4
