On Tue, 23 Apr 2019 14:16:48 +0000, Leonard Crestez wrote: > The BUCK2 regulator is used for cpufreq voltage control, otherwise > configuration is mostly static. > > This uses the newly-implemented rohm,reset-snvs-powered property to > properly handle the SNVS state of imx8mm. > > Between BD71837 and BD71847 the BUCK3/4 regulators were removed but > datasheet and board schematics kept the names for BUCK5/6/7/8. The > driver however renumbered 5/6/7/8 to 3/4/5/6. Use the names from DT > bindings and add comments to signal this. > > Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx> > Acked-By: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> > > --- > arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 131 +++++++++++++++++++ > 1 file changed, 131 insertions(+) > > Changes since v1: > - Move compatible property first > - Remove address/size numbering from regulators list > Link: https://marc.info/?l=linux-clk&m=155530430429151&w=2 > > Other imx8mm cpufreq patches in that series already accepted. > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
