On Sunday, April 28, 2019 5:08:22 PM CEST Jonathan Neuschäfer wrote: > The property is spelled 'bias-pull-up', as documented in > pinctrl-bindings.txt. > I also sent out a patch for that... back in 2017: https://patchwork.ozlabs.org/patch/763151/ It's marked Accepted and Archived. @rob ? > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> > --- > .../devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt | 2 +- > 5 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt > index c2dbb3e8d840..4e90ddd77784 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt > @@ -42,7 +42,7 @@ information about e.g. the mux function. > The following generic properties as defined in pinctrl-bindings.txt are valid > to specify in a pin configuration subnode: > > - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, > + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, > output-low, output-high. > > Non-empty subnodes must specify the 'pins' property. > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > index 991be0cd0948..84be0f2c6f3b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > @@ -44,7 +44,7 @@ information about e.g. the mux function. > > The following generic properties as defined in pinctrl-bindings.txt are valid > to specify in a pin configuration subnode: > - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. > + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. > > Non-empty subnodes must specify the 'pins' property. > Note that not all properties are valid for all pins. > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt > index 7ed56a1b70fc..a7aaaa7db83b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt > @@ -42,7 +42,7 @@ information about e.g. the mux function. > The following generic properties as defined in pinctrl-bindings.txt are valid > to specify in a pin configuration subnode: > > - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, > + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, > output-low, output-high. > > Non-empty subnodes must specify the 'pins' property. > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt > index cdc4787e59d2..f095209848c8 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt > @@ -42,7 +42,7 @@ information about e.g. the mux function. > The following generic properties as defined in pinctrl-bindings.txt are valid > to specify in a pin configuration subnode: > > - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, > + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, > output-low, output-high. > > Non-empty subnodes must specify the 'pins' property. > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt > index c22e6c425d0b..004056506679 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt > @@ -41,7 +41,7 @@ information about e.g. the mux function. > > The following generic properties as defined in pinctrl-bindings.txt are valid > to specify in a pin configuration subnode: > - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. > + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. > > Non-empty subnodes must specify the 'pins' property. > Note that not all properties are valid for all pins. > -- > 2.20.1 >
