The property is spelled 'bias-pull-up', as documented in pinctrl-bindings.txt. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- .../devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +- .../devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 2 +- .../devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt | 2 +- .../devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt | 2 +- .../devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index c2dbb3e8d840..4e90ddd77784 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt @@ -42,7 +42,7 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, output-low, output-high. Non-empty subnodes must specify the 'pins' property. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index 991be0cd0948..84be0f2c6f3b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -44,7 +44,7 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. Non-empty subnodes must specify the 'pins' property. Note that not all properties are valid for all pins. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt index 7ed56a1b70fc..a7aaaa7db83b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt @@ -42,7 +42,7 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, output-low, output-high. Non-empty subnodes must specify the 'pins' property. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt index cdc4787e59d2..f095209848c8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt @@ -42,7 +42,7 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, output-low, output-high. Non-empty subnodes must specify the 'pins' property. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt index c22e6c425d0b..004056506679 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -41,7 +41,7 @@ information about e.g. the mux function. The following generic properties as defined in pinctrl-bindings.txt are valid to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. Non-empty subnodes must specify the 'pins' property. Note that not all properties are valid for all pins. -- 2.20.1
