On Thu, Mar 06, 2014 at 06:01:19PM +0000, Ben Dooks wrote: > Add OF match table for pci-rcar-gen2 driver for device tree support. > > Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> I'm not sure what the status of this is. I saw comments about a missing #include, but I didn't see a fixed repost. Ben, could you please repost anything you have outstanding for me? > --- > Updates since v1: > - moved documentation into patch > - moved to using bus-range parsing > - ensured usb phy can be linked to usb devices > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > Cc: Simon Horman <horms@xxxxxxxxxxxx> > Cc: linux-pci@xxxxxxxxxxxxxxx > Cc: linux-sh@xxxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > --- > .../bindings/pci/renessas,pci-rcar-gen2.txt | 52 ++++++++++++++++++++++ > drivers/pci/host/pci-rcar-gen2.c | 33 +++++++++++++- > 2 files changed, 83 insertions(+), 2 deletions(-) > create mode 100644 Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt > > diff --git a/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt > new file mode 100644 > index 0000000..bd6d291 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/renessas,pci-rcar-gen2.txt > @@ -0,0 +1,52 @@ > +Renesas AHB to PCI bridge > +------------------------- > + > +This is the bridge used internally to connect the USB controllers to the > +AHB. There is one bridge instance per USB port consiting of an internal > +OHCI and EHCI controller. > + > +Required properties: > + - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC > + - reg : A list of physical regions to access the device. The first is > + the operational registers for the OHCI/EHCI controller and the > + second region is for the bridge configuration and control registers. > + - interrupts : interrupt for the device > + - clocks : The reference to the device clock > + - bus-range: The PCI bus number ranges. As this is a single bus, the range > + should be specified as the same value twice. > + > + > +Example SoC configuration: > + > + pci0: pci@ee090000 { > + compatible = "renesas,pci-r8a7790"; > + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; > + reg = <0x0 0xee090000 0x0 0xc00>, > + <0x0 0xee080000 0x0 0x1100>; > + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + > + bus-range = <0 0>; > + #address-cells = <3>; > + #size-cells = <2>; > + }; > + > +Example board setup: > + > +&pci1 { > + status = "okay"; > + pinctrl-0 = <&usb1_pins>; > + pinctrl-names = "default"; > + > + pci@0,1 { > + reg = <0x800 0 0 0 0>; > + device_type = "pci"; > + usb-phy = <&usbphy>; > + }; > + > + pci@0,2 { > + reg = <0x1000 0 0 0 0>; > + device_type = "pci"; > + usb-phy = <&usbphy>; > + }; > +}; > diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c > index fd3e3ab..1216784 100644 > --- a/drivers/pci/host/pci-rcar-gen2.c > +++ b/drivers/pci/host/pci-rcar-gen2.c > @@ -16,6 +16,7 @@ > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/pci.h> > +#include <linux/of_pci.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > #include <linux/sizes.h> > @@ -98,6 +99,7 @@ struct rcar_pci_priv { > struct resource io_res; > struct resource mem_res; > struct resource *cfg_res; > + unsigned busnr; > int irq; > unsigned long window_size; > }; > @@ -312,8 +314,8 @@ static int rcar_pci_setup(int nr, struct pci_sys_data *sys) > pci_add_resource(&sys->resources, &priv->io_res); > pci_add_resource(&sys->resources, &priv->mem_res); > > - /* Setup bus number based on platform device id */ > - sys->busnr = to_platform_device(priv->dev)->id; > + /* Setup bus number based on platform device id / of bus-range */ > + sys->busnr = priv->busnr; > return 1; > } > > @@ -366,6 +368,23 @@ static int rcar_pci_probe(struct platform_device *pdev) > > priv->window_size = SZ_1G; > > + if (pdev->dev.of_node) { > + struct resource busnr; > + int ret; > + > + ret = of_pci_parse_bus_range(pdev->dev.of_node, &busnr); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to parse bus-range\n"); > + return ret; > + } > + > + priv->busnr = busnr.start; > + if (busnr.end != busnr.start) > + dev_warn(&pdev->dev, "only one bus number supported\n"); > + } else { > + priv->busnr = pdev->id; > + } > + > hw_private[0] = priv; > memset(&hw, 0, sizeof(hw)); > hw.nr_controllers = ARRAY_SIZE(hw_private); > @@ -377,11 +396,21 @@ static int rcar_pci_probe(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_OF > +static struct of_device_id rcar_pci_of_match[] = { > + { .compatible = "renesas,pci-r8a7790", }, > + { }, > +}; > + > +MODULE_DEVICE_TABLE(of, rcar_pci_of_match); > +#endif > + > static struct platform_driver rcar_pci_driver = { > .driver = { > .name = "pci-rcar-gen2", > .owner = THIS_MODULE, > .suppress_bind_attrs = true, > + .of_match_table = of_match_ptr(rcar_pci_of_match), > }, > .probe = rcar_pci_probe, > }; > -- > 1.9.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html