[PATCH 1/3] usb: usb251xb: Add US lanes inversion dts-bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since a separate US ports lanes polarity inversion property is going to
be available the bindings doc-file should be updated with information
about swap-us-lanes bool property, which will be responsible for it.

Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/usb251xb.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 17915f64b8ee..bc7945e9dbfe 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,8 +64,10 @@ Optional properties :
  - power-on-time-ms : Specifies the time it takes from the time the host
 	initiates the power-on sequence to a port until the port has adequate
 	power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the ports which will swap the differential-pair
-	(D+/D-), default is not-swapped.
+ - swap-dx-lanes : Specifies the downstream ports which will swap the
+	differential-pair (D+/D-), default is not-swapped.
+ - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
+	swapping (boolean, default is not-swapped)
 
 Examples:
 	usb2512b@2c {
-- 
2.21.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux