2019.04.22 v3: - ag71xx: use phy_modes() instead of ag71xx_get_phy_if_mode_name() - ag71xx: remove .ndo_poll_controller support - ag71xx: unregister_netdev before disconnecting phy. 2019.04.18 v2: - ag71xx: add list of openwrt authors - ag71xx: remove redundant PHY_POLL assignment - ag71xx: use phy_attached_info instead of netif_info - ag71xx: remove redundant netif_carrier_off() on .stop. - DT: use "ethernet" instead of "eth" This patch series provide ethernet support for many Atheros/QCA MIPS based SoCs. I reworked ag71xx driver which was previously maintained within OpenWRT repository. So far, following changes was made to make upstreaming easier: - everything what can be some how used in user space was removed. Most of it was debug functionality. - most of deficetree bindings was removed. Not every thing made sense and most of it is SoC specific, so it is possible to detect it by compatible. - mac and mdio parts are merged in to one driver. It makes easier to maintaine SoC specific quirks. Oleksij Rempel (3): dt-bindings: net: add qca,ar71xx.txt documentation MIPS: ath79: ar9331: add Ethernet nodes net: ethernet: add ag71xx driver .../devicetree/bindings/net/qca,ar71xx.txt | 44 + arch/mips/boot/dts/qca/ar9331.dtsi | 25 + arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 8 + drivers/net/ethernet/atheros/Kconfig | 11 +- drivers/net/ethernet/atheros/Makefile | 1 + drivers/net/ethernet/atheros/ag71xx.c | 1946 +++++++++++++++++ 6 files changed, 2034 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/qca,ar71xx.txt create mode 100644 drivers/net/ethernet/atheros/ag71xx.c -- 2.20.1
