Best Regards! Anson Huang > -----Original Message----- > From: Aisheng Dong > Sent: Wednesday, April 17, 2019 11:32 AM > To: Anson Huang <anson.huang@xxxxxxx>; robh+dt@xxxxxxxxxx; > mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; > kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; catalin.marinas@xxxxxxx; > will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx; edubezval@xxxxxxxxx; > daniel.lezcano@xxxxxxxxxx; ulf.hansson@xxxxxxxxxx; Daniel Baluta > <daniel.baluta@xxxxxxx>; Peng Fan <peng.fan@xxxxxxx>; > heiko@xxxxxxxxx; horms+renesas@xxxxxxxxxxxx; agross@xxxxxxxxxx; > olof@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx; jagan@xxxxxxxxxxxxxxxxxxxx; > enric.balletbo@xxxxxxxxxxxxx; marc.w.gonzalez@xxxxxxx; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx > Cc: dl-linux-imx <linux-imx@xxxxxxx> > Subject: RE: [PATCH V12 1/5] dt-bindings: fsl: scu: add thermal binding > > > From: Anson Huang > > Sent: Tuesday, April 16, 2019 11:22 AM > > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system > > controller, the system controller is in charge of system power, clock > > and thermal sensors etc. management, Linux kernel has to communicate > > with system controller via MU (message unit) IPC to get temperature > > from thermal sensors, this patch adds binding doc for i.MX system > controller thermal driver. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > --- > > No changes. > > --- > > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 16 > > ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > index 5d7dbab..f4fb6d5 100644 > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > @@ -133,6 +133,17 @@ RTC bindings based on SCU Message Protocol > > Required properties: > > - compatible: should be "fsl,imx8qxp-sc-rtc"; > > > > +Thermal bindings based on SCU Message Protocol > > +------------------------------------------------------------ > > + > > +Required properties: > > +- compatible: Should be : > > + "fsl,imx8qxp-sc-thermal" > > + followed by "fsl,imx-sc-thermal"; > > + > > +- #thermal-sensor-cells: See > > Documentation/devicetree/bindings/thermal/thermal.txt > > + for a description. > > Better to have an explicit value here. > e.g. > Must be 1. See xxx for a description. OK, will add it in next version. Anson. > > Otherwise: > Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx> > > Regards > Dong Aisheng
